Photo of the product DTS-8GP
Photo of the product DTS-8GP

DTS-8GP

Industrial 8-port PTP & PRP/HSR/TSN Managed Switch

  • Redundancy Protocols
    • ITU-T G.8032 ERPS Ring (<20ms)
    • xSTP, DRP, and MRP (Manager/Client) Redun- dancy Protocol
  • Precision Time Protocol (PTP)
    • IEEE 1588v2 End-to-End/Peer-to-Peer, 1step/2-step TC/BC/OC
    • 802.1AS-2020 (gPTP) Bridge/End-Station
    • IEC 61950-9-3 and IEEE C37.238-2017 Power Profile Nanosecond-level (ns) Accuracy
    • 1 PPS for Synchronize with External Timing Equipment (optional)
  • **HSR/PRP
    • IEC 62439-3 HSR/PRP Seamless Redundancy Protocol (=0ms)
    • IEC 61850-90-4 MMS Server for Switching Data with SCADA
  • Automation Protocols
    • EtherNet/IP, Modbus TCP, PROFINET, IEC 60870-5-104
  • Physical
    • 802.1Qav/802.1Qbv/802.1Qbu/802.3br
    • 802.1Qci/802.1CB/802.1Qch
* means optional. Order by request.

RJ45 Copper Ports

  • Port Number: 8
  • Speed: 10 / 100 / 1000 Mbps
  • MDI / MDIX Auto-crossover: Support straight or cross wired cables
  • Auto-negotiation / Duplex: 10 / 100 / 1000 Mbps speed auto-negotiation; Full & Half Duplex

Capacity

  • Mac Address: 32K
  • Packet Buffer: 24Mbits
  • Jumbo Frame: 10K
  • Backplane / Switching Fabric: 50Gbps
  • Trunk Group: 8
  • Priority Queues: 8
  • VLAN Table: 4096
  • VLAN ID Range 1 to 4094
  • Static IGMP Groups: 256
  • Dynamic IGMP Groups: 1K

Interfaces

  • LED Indicators:
    • System: PWR1 (Green), PWR2 (Green), Alarm (Red), Sys (Green)
    • Ethernet port: RJ-45 Link / Speed, SFP Link
  • Console: RS232 (RJ45 connector)
  • DI / DO:
    • 2 Digital Input (DI): Level 0: -30 ~ 2V / Level 1: 10 ~ 30V Max input current:8mA
    • 2 Digital Output (DO): Open collector to 40 VDC, 200mA
  • Relay Output: Current carry ability 1A@24VDC
  • Reset Button: Yes

PoE

  • PoE Ports: Max 30W per-port: support IEEE 802.3at / af End-point, Alternative A mode
  • PoE Budget:
    • 240W (Standard model)
    • 120W (-24V model)
    • 80W@12V, 120W@24V, 240W@48V (-EV model)
  • PoE Pin Assignment:
    • Positive (VCC+): RJ-45 pin 1,2
    • Negative (VCC-): RJ-45 pin 3,6

Power

  • Input Voltage:
    • Dual input for 44V ~ 56VDC (Standard model)
    • Dual input for 9V ~ 36VDC (-24V model)
    • Dual input for 9.5V ~ 56VDC (-EV model)
  • Connector: 6-Pin Terminal Block
  • Power Consumption: Max. 27W (full load w / o PoE)

Environmental Limits

  • Operating Humidity: 5% ~ 95% (Non-condensing)
  • Operating Temperature:
    • -20°C ~ 60°C / -4°F ~ 140°F (Standard model)
    • -40°C ~ 75°C / -40°F ~ 167°F (-I model)
  • Storage Temperature: -40°C ~ 85°C / -40°F ~ 185°F

Physical Characteristics

  • Housing: Metal case. IP-30
  • Dimension: 95.84 (W) x 135 (D) x 152 (H) mm
  • Weight: 900 group
  • Installation: DIN Rail, Wall Mount

Regulatory Approvals

  • MTBF: 586082.5 hours
  • EMI: FCC Class A
  • EMS:
    • CE EN55032 Class A
    • CE EN55024
    • CE EN61000-4-2
    • CE EN61000-4-3
    • CE EN61000-4-4
    • CE EN61000-4-5
    • CE EN61000-4-6
    • CE EN61000-4-8
    • CE EN61000-6-2
  • Stability: |
    • IEC 60068-2-32 (Free fall)
    • IEC 60068-2-27 (Shock)
    • IEC 60068-2-6 (Vibration)

Warranty

  • Warranty: 5 years

Precision Time Protocol

  • Default Profile: IEEE 1588v2 End-to-End / Peer-to-Peer TC / BC / OC
  • Industrial / Automation Profile: 802.1AS-2020 (gPTP) Bridge / End-Station
  • Power Profile: IEC 61850-9-3 and IEEE C37.238-2017

Time-Sensitive Networking (TSN)

  • TSN: Full function support: 802.1Qav / 802.1Qbv / 802.1Qbu / 802.3br / 802.1Qci / 802.1CB / 802.1Qch

HSR / PRP

  • Seamless (0=ms): IEC 62439-3 HSR / PRP

Industrial Automation

  • Protocols: EtherNet / IP, Modbus TCP, PROFINET, IEC 60870-5-104

Layer 3 IPv4 / 6 Routing (IPv6 Ready)

  • Static routing / Inter VLAN routing
  • Unicast routing RIPv1 / v2, OSPFv1 / v2, BGP4*, RIPng*, OSPFv3*, BGP4+*
  • Multicast routing DVMRP, PIM-SM, PIM-DM, PIM-SSM, PIMv6*
  • Redundant VRRP, VRRPv3*
  • Supports IGMP v1 / v2 / v3, MLD v1 / v2

NAT (Network Address Translation)

  • Hardware NAT Translations: Wire-speed performance
  • One-to-One NAT
  • Port Forwarding
  • Dynamic NAT
  • Port Overload (PAT-Port Address Translations): TCP Timeout (sec.) UDP Timer (sec.)

MACSEC

  • 128-bit and 256-bit cipher suites (GCM-AES-256)

Link Aggregation

  • Static & Dynamic aggregation (IEEE 802.3ad LACP)
  • Maximum 8 groups (LAGs) and max 8 member ports per LAG

Broadcast / Multicast / Unicast Storm Suppression

  • Storm suppression based on port bandwidth percentage & PPS*

MAC Address Table

  • Static & Blackhole MAC address
  • MAC learning limit*

VLAN

  • IEEE 802.1Q Tag VLAN (up to 4094 VLANs)
  • Port-based VLAN (up to 4094 VLANs)
  • Protocol-based / IP subnet-based / MAC-based VLAN
  • QinQ (double-tag VLAN)
  • VLAN Mapping (VLAN Translation)*
  • Voice VLAN*
  • MVRP*

Spanning Tree

  • Supports STP / RSTP / MSTP
  • BPDU Guard and Root Guard

Loop Protect

  • Loopback detection and prevention

ERPS

  • ITU G.8032 Ethernet ring protection switching (ERPS)
  • High Performance (<20ms)

DRP

Support DRP

MRP

Support Manager / Client Redundancy

DHCP

  • DHCP Client including option 66
  • DHCP Snooping including option 82 / 66*
  • DHCP Relay including option 82
  • DHCP Server
    • MAC-based can assign IP address by specific host
    • Port-based can assign IP address by specific port

Mirroring

  • Local port mirroring: Ingress, Egress or both direction per port
  • Remote port mirroring: RSPAN*

Quality of Service

  • Port-based priority with 802.1p CoS priority override*
  • 802.1p CoS priority and IPv4 DSCP priority
  • 8 Hardware queues per port
  • Flexible queue scheduling algorithms including SP, WRR, and SP + WRR*

Bandwidth Control (Rate Limit)

  • Bi-directional Rate limit in percentage (Ingress and Egress)
  • In the ingress direction, packet type (Broadcast / Multicast / Unicast packet) combination rules are allowed
  • Traffic shaping in egress*

ACL

  • Layer 2 to Layer 4 packet filtering
  • Traffic classification based on source MAC, destination MAC, source IP, destination IP, TCP / UDP port, and VLAN*
  • Bi-directional ACLs (Ingress and Egress)*
  • Time range-based bi-directional ACLs (Ingress and Egress)*
  • VLAN-based ACL issuing*

Discovery Protocol

  • Link Layer Discovery Protocol (LLDP) and CDP (Cisco Discovery Protocol)

Multicast

  • IGMP Snooping v1 / v2 / v3 and MLD Snooping v1 / v2

Security

  • Hierarchical user management and password protection*
  • Supports up to 10 IP addresses to access the switch
  • HTTPS for secure access to the web interface
  • SSH 2.0 for secure shell to command line interface
  • MAC-based authentication
  • 802.1X
  • 802.1X with VLAN assignment*
  • 802.1X dynamic access control list (ACL) based on RADIUS attributes*
  • RADIUS and TACACS+ Authentication
  • Guest VLAN*
  • Supports Port Isolation*
  • AAA authentication*
  • Dynamic ARP Inspection*

SNMP & MIB

  • SNMP v1 / v2c / v3 and Trap
  • SNMP v1 / v2 providing light security by means of the community strings*
  • SNMP v3 providing User-based Security Model (USM) and Transport Security Model (TSM)*
  • Remote Monitoring (RMON) alarm, event, and history recording
  • Remote Monitoring (RMON) (RFC2819) Groups 1,2,3,9
  • RFC 1213 MIB II, RFC 1157 SNMP MIB, RFC 1573 IF MIB, RFC 1757 RMON, Private MIB

IP Stack for Managed Interface

  • Both IPv4 and IPv6 stack simultaneously

IPv6 for Managed Interface

  • Neighbor Discovery (ND)*
  • IPv6-Ping, IPv6-Tracert, IPv6-Telnet, and IPv6-TFTP*
  • DHCP Client for IPv6*

Configuration Import and Export

  • Readable text configuration file for system quick installation
  • Supports HTTP / HTTPs / FTP / FTP-SSL / SFTP / TFTP backup and restore config file*

Firmware

  • Upgrading via HTTP / HTTPs / FTP / FTP-SSL / SFTP / TFTP*

Management

  • Supports CLI via SSH 2.0, Telnet and Console
  • System log, alarming based on severity*
  • WEB UI management through HTTP / HTTPs
  • NTP, SNTP
  • Ping, Tracert

Remote Management

  • NETCONF / YANG*

DHCP for IPv6

  • DHCPv6 Client including option 66
  • DHCPv6 Snooping including option 82 / 66
  • DHCPv6 Relay including option 82
  • DHCPv6 Server
    • MAC-based can assign IP address by specific host
    • Port-based can assign IP address by specific port
* means optional. Order by request.

Order Information

Model Name P/N Description
DTS-8GP DTS-8GP

Dual 44 ~ 56VDC input
-20°C ~ 60°C / -4°F ~ 140°F
PoE per-port up to 30W; PoE total budget 240W

DTS-8GP DTS-8GP-I

Dual 44 ~ 56VDC input
-40°C ~ 75°C / -40°F ~ 167°F
PoE per-port up to 30W; PoE total budget 240W

DTS-8GP DTS-8GP-24V

Dual 9 ~ 36VDC input
-20°C ~ 60°C / -4°F ~ 140°F
PoE per-port up to 30W; PoE total budget 80W@12V, 120W@24V

DTS-8GP DTS-8GP-24V-I

Dual 9 ~ 36VDC input
-40°C ~ 75°C / -40°F ~ 167°F
PoE per-port up to 30W; PoE total budget 80W@12V, 120W@24V

DTS-8GP DTS-8GP-12V

Dual 9.5V ~ 56VDC input
-20°C ~ 60°C / -4°F ~ 140°F
PoE per-port up to 30W; PoE total budget 80W@12V, 120W@24V, 240W@48V

DTS-8GP DTS-8GP-12V-I

Dual 9.5V ~ 56VDC input
-40°C ~ 75°C / -40°F ~ 167°F
PoE per-port up to 30W; PoE total budget 80W@12V, 120W@24V, 240W@48V