RJ45 Copper Ports
|
- Port Number: 4
- Speed: 10 / 100 / 1000 Mbps
- MDI / MDIX Auto-crossover: Support straight or cross wired cables
- Auto-negotiation / Duplex: 10 / 100 / 1000 Mbps speed auto-negotiation; Full & Half Duplex
|
Fiber Ports
|
- Port Number: 2
- Port Types Supported: 1G / 2.5G / 10G
- Fiber Port Connector: SFP+ (Mini-GBIC)
|
Capacity
|
- Mac Address: 32K
- Packet Buffer: 24Mbits
- Jumbo Frame: 10K
- Backplane / Switching Fabric: 50Gbps
- Trunk Group: 8
- Priority Queues: 8
- VLAN Table: 4096
- VLAN ID Range 1 to 4094
- Static IGMP Groups: 256
- Dynamic IGMP Groups: 1K
|
Interfaces
|
- LED Indicators:
- System: PWR1 (Green), PWR2 (Green), Alarm (Red), Sys (Green)
- Ethernet port: RJ-45 Link / Speed, SFP Link
- Console: RS232 (RJ45 connector)
- DI / DO:
- 2 Digital Input (DI): Level 0: -30 ~ 2V / Level 1: 10 ~ 30V Max input current:8mA
- 2 Digital Output (DO): Open collector to 40 VDC, 200mA
- Relay Output: Current carry ability 1A@24VDC
- Reset Button: Yes
|
PoE
|
- PoE Ports: Max 30W per-port: support IEEE 802.3at / af End-point, Alternative A mode
- PoE Budget:
- 240W (Standard model)
- 120W (-24V model)
- 80W@12V, 120W@24V, 240W@48V (-EV model)
- PoE Pin Assignment:
- Positive (VCC+): RJ-45 pin 1,2
- Negative (VCC-): RJ-45 pin 3,6
|
Power
|
- Input Voltage:
- Dual input for 44V ~ 56VDC (Standard model)
- Dual input for 9V ~ 36VDC (-24V model)
- Dual input for 9.5V ~ 56VDC (-EV model)
- Connector: 6-Pin Terminal Block
- Power Consumption: Max. 27W (full load w / o PoE)
|
Environmental Limits
|
- Operating Humidity: 5% ~ 95% (Non-condensing)
- Operating Temperature:
- -20°C ~ 60°C / -4°F ~ 140°F (Standard model)
- -40°C ~ 75°C / -40°F ~ 167°F (-I model)
- Storage Temperature: -40°C ~ 85°C / -40°F ~ 185°F
|
Physical Characteristics
|
- Housing: Metal case. IP-30
- Dimension: 95.84 (W) x 135 (D) x 152 (H) mm
- Weight: 900 group
- Installation: DIN Rail, Wall Mount
|
Regulatory Approvals
|
- MTBF: 586082.5 hours
- EMI: FCC Class A
- EMS:
- CE EN55032 Class A
- CE EN55024
- CE EN61000-4-2
- CE EN61000-4-3
- CE EN61000-4-4
- CE EN61000-4-5
- CE EN61000-4-6
- CE EN61000-4-8
- CE EN61000-6-2
- Stability: |
- IEC 60068-2-32 (Free fall)
- IEC 60068-2-27 (Shock)
- IEC 60068-2-6 (Vibration)
|
Certifications
|
- 'Power Substation':
- IEC 61850-3 Edition 2.0 Class 2
- IEEE 1613
|
Warranty
|
|
Precision Time Protocol
|
- Default Profile: IEEE 1588v2 End-to-End / Peer-to-Peer TC / BC / OC
- Industrial / Automation Profile: 802.1AS-2020 (gPTP) Bridge / End-Station
- Power Profile: IEC 61850-9-3 and IEEE C37.238-2017
|
Time-Sensitive Networking (TSN)
|
- TSN: Full function support: 802.1Qav / 802.1Qbv / 802.1Qbu / 802.3br / 802.1Qci / 802.1CB / 802.1Qch
|
HSR / PRP
|
- Seamless (0=ms): IEC 62439-3 HSR / PRP
|
Industrial Automation
|
- Protocols: EtherNet / IP, Modbus TCP, PROFINET, IEC 60870-5-104
|
Layer 3 IPv4 / 6 Routing (IPv6 Ready)
|
- Static routing / Inter VLAN routing
- Unicast routing RIPv1 / v2, OSPFv1 / v2, BGP4*, RIPng*, OSPFv3*, BGP4+*
- Multicast routing DVMRP, PIM-SM, PIM-DM, PIM-SSM, PIMv6*
- Redundant VRRP, VRRPv3*
- Supports IGMP v1 / v2 / v3, MLD v1 / v2
|
NAT (Network Address Translation)
|
- Hardware NAT Translations: Wire-speed performance
- One-to-One NAT
- Port Forwarding
- Dynamic NAT
- Port Overload (PAT-Port Address Translations): TCP Timeout (sec.) UDP Timer (sec.)
|
MACsec
|
- 128-bit and 256-bit cipher suites (GCM-AES-256)
|
Link Aggregation
|
- Static & Dynamic aggregation (IEEE 802.3ad LACP)
- Maximum 8 groups (LAGs) and max 8 member ports per LAG
|
Broadcast / Multicast / Unicast Storm Suppression
|
- Storm suppression based on port bandwidth percentage & PPS*
|
MAC Address Table
|
- Static & Blackhole MAC address
- MAC learning limit*
|
VLAN
|
- IEEE 802.1Q Tag VLAN (up to 4094 VLANs)
- Port-based VLAN (up to 4094 VLANs)
- Protocol-based / IP subnet-based / MAC-based VLAN
- QinQ (double-tag VLAN)
- VLAN Mapping (VLAN Translation)*
- Voice VLAN*
- MVRP*
|
Spanning Tree
|
- Supports STP / RSTP / MSTP
- BPDU Guard and Root Guard
|
Loop Protect
|
- Loopback detection and prevention
|
ERPS
|
- ITU G.8032 Ethernet ring protection switching (ERPS)
- High Performance (<20ms)
|
DRP
|
Support DRP
|
MRP
|
Support Manager / Client Redundancy
|
DHCP
|
- DHCP Client including option 66
- DHCP Snooping including option 82 / 66*
- DHCP Relay including option 82
- DHCP Server
- MAC-based can assign IP address by specific host
- Port-based can assign IP address by specific port
|
Mirroring
|
- Local port mirroring: Ingress, Egress or both direction per port
- Remote port mirroring: RSPAN*
|
Quality of Service
|
- Port-based priority with 802.1p CoS priority override*
- 802.1p CoS priority and IPv4 DSCP priority
- 8 Hardware queues per port
- Flexible queue scheduling algorithms including SP, WRR, and SP + WRR*
|
Bandwidth Control (Rate Limit)
|
- Bi-directional Rate limit in percentage (Ingress and Egress)
- In the ingress direction, packet type (Broadcast / Multicast / Unicast packet) combination rules are allowed
- Traffic shaping in egress*
|
ACL
|
- Layer 2 to Layer 4 packet filtering
- Traffic classification based on source MAC, destination MAC, source IP, destination IP, TCP / UDP port, and VLAN*
- Bi-directional ACLs (Ingress and Egress)*
- Time range-based bi-directional ACLs (Ingress and Egress)*
- VLAN-based ACL issuing*
|
Discovery Protocol
|
- Link Layer Discovery Protocol (LLDP) and CDP (Cisco Discovery Protocol)
|
Multicast
|
- IGMP Snooping v1 / v2 / v3 and MLD Snooping v1 / v2
|
Security
|
- Hierarchical user management and password protection*
- Supports up to 10 IP addresses to access the switch
- HTTPS for secure access to the web interface
- SSH 2.0 for secure shell to command line interface
- MAC-based authentication
- 802.1X
- 802.1X with VLAN assignment*
- 802.1X dynamic access control list (ACL) based on RADIUS attributes*
- RADIUS and TACACS+ Authentication
- Guest VLAN*
- Supports Port Isolation*
- AAA authentication*
- Dynamic ARP Inspection*
|
SNMP & MIB
|
- SNMP v1 / v2c / v3 and Trap
- SNMP v1 / v2 providing light security by means of the community strings*
- SNMP v3 providing User-based Security Model (USM) and Transport Security Model (TSM)*
- Remote Monitoring (RMON) alarm, event, and history recording
- Remote Monitoring (RMON) (RFC2819) Groups 1,2,3,9
- RFC 1213 MIB II, RFC 1157 SNMP MIB, RFC 1573 IF MIB, RFC 1757 RMON, Private MIB
|
IP Stack for Managed Interface
|
- Both IPv4 and IPv6 stack simultaneously
|
IPv6 for Managed Interface
|
- Neighbor Discovery (ND)*
- IPv6-Ping, IPv6-Tracert, IPv6-Telnet, and IPv6-TFTP*
- DHCP Client for IPv6*
|
Configuration Import and Export
|
- Readable text configuration file for system quick installation
- Supports HTTP / HTTPs / FTP / FTP-SSL / SFTP / TFTP backup and restore config file*
|
Firmware
|
- Upgrading via HTTP / HTTPs / FTP / FTP-SSL / SFTP / TFTP*
|
Management
|
- Supports CLI via SSH 2.0, Telnet and Console
- System log, alarming based on severity*
- WEB UI management through HTTP / HTTPs
- NTP, SNTP
- Ping, Tracert
|
Remote Management
|
|
DHCP for IPv6
|
- DHCPv6 Client including option 66
- DHCPv6 Snooping including option 82 / 66
- DHCPv6 Relay including option 82
- DHCPv6 Server
- MAC-based can assign IP address by specific host
- Port-based can assign IP address by specific port
|