Industrial LTE Wireless Router

Industrial 2x 1GE LTE Wireless Router w/ 2.4G/5G Dual Band 802.11a/b/g/n/ac Wi-Fi

  • 2x GE ports can be configured as LAN or WAN interface
  • Dual band(2.4G and 5G) 802.11a/b/g/n/ac WI-Fi with 3x3 SU-MIMO technology with SMA type connectors, up to 3 optional antennas
  • Virtual access point up to 16 SSIDs
  • Highly Wi-Fi security capability that supports WEP 64/WEP 128/WPA personal (TKIP,AES)/WPA2 personal (TKIP,AES)/WPA Enterprise/WPA2 Enterprise
  • Wi-Fi Multimedia (WMM) 802.11e traffic prioritization
  • 3G support UMTS/HSPA/HSPA+, 4G support LTE CAT6 with 300 Mbps downlink, 50 Mbps uplink
  • Global navigation satellite systems support GPS, GLONASS, Galileo and BeiDou
  • 2x Serial ports for modbus RTU gateway that support RS-232 or RS-422/485
  • Load balancing mechanisms for WAN interface
  • Supports VRRP to increase network availability and reliability
  • Firewall support DoS protection, IP address filter,
  • Mac address filter, source port filter and destination port filter
  • Supports port forwarding and DMZ to easy deploy service
  • Supports IPSec/L2TP/OpenVPN for security remote access
  • DHCP server/client/relay**, which supports addition option 66**/82** for network security
  • Support for IEEE802.1Q VLAN
  • RIP and BGP
  • Supports LLDP and CDP** for network discovery protocols
  • WEB based management UI via HTTP/HTTPs, which also provides CLI, SSH and telnet. All of them support external AAA Authentication Services with RADIUS** and TACACS+**
  • SNMPv1/v2c/v3 for different levels of network management
  • Logging event and warning by exception through SMS, e-mail, SNMP trap and relay output automatic
  • Software upgrade via TFTP,HTTP/HTTPs that also supports redundant firmware** in case of upgrade failure
  • Redundant dual DC input power 12V to 48V, max 1.5A
* means optional. Order by request.

IntrisingTM WDG0200

IntrisingTM WDG0200 is a high-performance wireless router build-in 2x GE ports, one for dual-band Wi-Fi module and one for LTE module as optional. The wired GE ports can be configured as LAN or WAN port, and support lots of protocol such as PPPoE, DHCP client, static IP. Wi-Fi can be used as access point (AP) or station (client) mode providing a easy and flexible way to build up a wireless environment. Furtherly, Wi-Fi bridge mode is also provided. 4G LTE CAT6 is up to 300 Mbps downlink / 50 Mbps uplink, and can be back forward compatible with 3G UMTS/HSPA/HSPA+. Additionally, VRRP can increase availability and reliability via automatic choice master default gateway in network topology. If the master is broken, slaves will be woken up and replace the master quickly. Load balancing is another feature for multiple WAN redundancy and traffic optimization, which supports four mechanisms for combining multiple WAN, such as fixd, failover, priority and round robin. It can also help with fully-used WAN resource. Other functions include port based DHCP server, MAC based DHCP server and option 82** for DHCP relay. The network discovery supports LLDP and CDP (Cisco Discovery Protocol) that helps to scan and show whole network topology. The firewall supports DoS protection, IP address filter, Mac address filter, source port filter and destination port filter. It also includes DMZ and port forwarding for virtual server deployment. In the security sensitive application, it supports a lot of popular VPN and tunneling technology, such as IPSec, L2TP over IPsec client, OpenVPN client and GRE.

Dual gigabit WAN ports and load balancing with four mechanisms

WDG0200 provides two gigabit ethernet WAN ports that work concurrent. It also supports four algorithms to scheduling WAN port traffic, include fixed, failover, priority and round robin that help to use WAN bandwidth appropriately.

LTE Cat6 backward compatible UMTS/HSPA/HSPA+ and GNSS

Compatible 3G/4G LTE Cat6 is up to 300 Mbps downlink and 50 Mbps uplink. WDG0200 supports lots of LTE band including APAC, EMEC and Worldwide. GNSS supports four types, GPS, GLONASS, Galileo and BeiDou that can report location by latitude and longitude, and it also includes speed, height, satellite number and signal.

2.4G & 5G Dual Band WI-Fi

Support for 801.11a/b/g/n/ac WI-FI, maximum three antennas with 3x3 MIMO, bandwidth up to 1300 Mbps.


VRRP serves more availability and reliability in the network. VRRP can automatically choose one router as default gateway (master) and let others as standby (slave).

Port/MAC based DHCP server, option 82** DHCP Relay and IPv6 DHCP server**

MAC based DHCP server can assign dedicated IP address to certain client by client’s MAC Address. DHCP option 82 can be a security feature added its payload by multiple switches forwarding the request to one single DHCP option server.

Event log and Event Action

WDG0200-1L-1ac has many useful logs for network troubleshooting in case of emergency. Once the device is out of the situation, it will automatically send SMS**, email, SNMP trap or syslog to the manager immediately.

Dual power DC input

It supports dual DC power supplies DC 12V to 48V input to increase the network reliability.

Series Comparison

LTE Router Access Point
Wi-Fi (2.4G/5G) -
3G/4G -
Modbus - - -


Standards Ethernet:
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Ethernet
IEEE 802.3x Flow Control Capability
ANSI/IEEE 802.3 Auto-negotiation
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
IEEE 802.11a/n/ac (5GHz)
IEEE 802.11b/g/n (2.4GHz)
Connectors 2x 10/100/1000T RJ45 with auto MDI/MDI-X function
1x RS-232 console (RJ45)
1x USB 3.0(Only) for upload/download config file
2x SIM card slot
6x SMA connector ( 3 for Wi-Fi male, 3 for LTE female)
1x 6 pin terminal block (Power)
Console Port Baud rate 115200-8N1
Serial Port
(Default is RS-232)
Baud rate: 300 / 600 / 1200 / 2400 / 2800 / 4800 / 9600 / 19200 / 115200
Mode: 7N1 / 8N1 / 7E1 / 8E1 / 7O1 / 8O1 / 7N2 / 8N2 / 7E2 / 8E2 / 7O2 / 8O2
Baud rate: 300 / 600 / 1200 / 2400 / 2800 / 4800 / 9600 / 19200 / 115200
Mode: 7N1 / 8N1 / 7E1 / 8E1 / 7O1 / 8O1 / 7N2 / 8N2 / 7E2 / 8E2 / 7O2 / 8O2
WLAN Rate IEEE802.11b : 1/2/5.5/11 Mbps
IEEE802.11a/g : 6/9/12/18/24/36/48/54 Mbps
IEEE802.11n : up to 450Mbps
IEEE802.11ac : up to 1300Mbps
WLAN Power (2.4G) Output Power TX +/- 2dB (per chain) 18dBm @ 1~11Mbps
18dBm @ 6~54Mbps
20dBm @ MCS0~MCS7 (HT20/HT40)
Receiver Sensitivity RX +/- 2dB (per chain)
≦-95dBm @ 1~11Mbps
≦-92dBm @ 6~18Mbps
≦-88dBm @ 24Mbps
≦-85dBm @ 36Mbps
≦-81dBm @ 48Mbps
≦-80dBm @ 54Mbps
≦-94dBm @ MCS0 (HT20/HT40)
≦-76dBm @ MCS7 (HT20/HT40)
WLAN Power (5G) Output Power TX +/- 2dB (per chain)
18dBm @ 1~11Mbps
18dBm @ 6~54Mbps
20dBm @ MCS0~MCS7 (HT20/HT40)
Receiver Sensitivity RX +/- 2dB (per chain)
≦-95dBm @ 1~11Mbps
≦-92dBm @ 6~18Mbps
≦-88dBm @ 24Mbps
≦-85dBm @ 36Mbps
≦-81dBm @ 48Mbps
≦-80dBm @ 54Mbps
≦-94dBm @ MCS0 (HT20/HT40)
≦-76dBm @ MCS7 (HT20/HT40)
LTE Band Optional (Default is APAC) APAC:
B1 (2100 MHz)B3 (1800 MHz)B5 (850 MHz)B7 (2600 MHz)
B8 (900 MHz)B18 (850)B19 (850)B21 (1500 MHz)
B28 (700 MHz)

B1 (2100 MHz)B2 (1900 MHz)B3 (1800 MHz)B4 (1700 MHz)
B5 (850 MHz)B7 (2600)B8 (900)B12 (700 MHz)
B13 (700 MHz)B20 (800 MHz)B25 (1900 MHz)B26 (8500 MHz)
B29 (700 MHz)B30 (2300 MHz)

B1 (2100 MHz)B2 (1900 MHz)B3 (1800 MHz)B4 (1700 MHz)
B5 (850 MHz)B7 (2600)B8 (900)B9 (1800MHz)
B12 (700 MHz)B13 (700 MHz)B18 (850 MHz)B19 (850 MHz)
B20 (800 MHz)B26 (850 MHz)B28 (700 MHz)B29 (700 MHz)
B30 (2300 MHz)B32 (1500 MHz)
GNSS GPS, Glonass, Beidou, Galileo
Power Supply Dual input for 9V ~ 56VDC
Power Consumption 20W
Installation DIN Rail and Wall Mount Design
Warranty 5 years


Management SNMP v1/v2c/v3, Web (Http/Https), CLI (Telnet/SSH)
SNMP MIB RFC 1215 Traps MIB*
RFC 1493 Bridge MIB
Partial RFC 1757 RMON,
RFC 2674 Q-Bridge MIB; Bridge MIB
Private MIB
Discovery Protocol LLDP and CDP(Cisco Discovery Protocol)**
VLAN Port Based VLAN
IEEE 802.1Q Tag VLAN
VLAN ID(VLAN ID can be assigned from 1 to 4094)
IPv6/4 Present
SSID Virtual access point up to 16 SSIDs
WMM Wi-Fi Multimedia (WMM) 802.11e** traffic prioritization
Login Security Supports IEEE802.1X Authentication with RADIUS** and TACACS+**
Network Security HTTPS for secure access to the web interface
SSH for secure shell to command line interface
System Log Supports System log record to remote server
E-Mail/SMS Supports SMTP Server or cloud server to send event alert. Maximum 8 e-mail accounts for receiving event alert.
Also can send event alert via SMS
SNMP Trap SNMP trap v1/v2c/v3
DHCP Provide DHCP v4/v6** Client/Server/Relay that support addition option 82
MAC based can assign IP address by specific host
Port based can assign IP address by specific port
DNS Provide DNS client feature and support primary and secondary DNS server
SNTP Supports SNTP to synchronize system clock via Internet
Firewall Filtering
  • MAC address filter
  • IP address filter
  • source/destination port filter
  • TCP/UDP/ICMP filter
  • URL filter
  • DoS protection
Others :
  • Port forwarding
  • DMZ
VRRP Up to 5 virtual gateway
Load Balancing Fixed, Failover, Priority and Round robin
Tunneling L2 over GRE
VPN Client IPSec
L2TP over IPSec
Firmware Update Supports HTTP/HTTPs/TFTP firmware upgrade
Configuration import and export Supports text configuration file for system quick installation.
Support factory reset button to restore all settings back to factory default.
Support USB storage backup and restore config file.

LED Indicators

Power indicator Power 1 (Green)
Power 2 (Green)
10/100/1000 Base-T indicator Orange: Link/Act
Green : 1G Speed
WLAN On (Green), Blinking (Green)
LTE On (Green), Blinking (Green)
GPS On (Green), Blinking (Green)
Fault Fault (Red), Blinking (Red)

Physical Characteristic

Dimension Metal case. IP 30, 74mm(W) x 114mm(D) x 152mm(H)
Weight 900 g


Operating Humidity 5% ~ 95% (Non-condensing)
Operating Temperature -20°C~70°C / -4°F~158°F
Storage Temperature -40°C~85°C / -40°F~185°F

Regulatory approvals

EMC/EMI/EMS FCC Part 15 Class A
CE EN55032
CE EN61000-4-2 (ESD)
CE EN61000-4-3 (RS)
CE EN61000-4-4 (EFT)
CE EN61000-4-5 (Surge)
CE EN61000-4-6 (CS)
CE EN61000-4-8
CE EN61000-4-11
* means optional. Order by request.