IntrisingTM WDG0200-1ac is a high performance wireless router build-in 2x GE ports and one dual-band Wi-Fi module. The wired GE ports can be configured as LAN or WAN port, and support lots of protocol such as PPPoE, DHCP client, static IP. Wi-Fi can be used as access point (AP) or station (client) mode providing a easy and flexible way to build up a wireless environment. Furtherly, Wi-Fi bridge mode is also provided. In the redundancy, VRRP can increase availability and reliability via automatic choice master default gateway in network topology. If the master is broken, slaves will be wake up and replace it quickly. Load balancing is the other feature for multiple WAN redundancy and traffic optimization, that support four mechanism for combination multiple WAN, such as fixd, failover, priority and round robin, It can help to fully used WAN resource. Other functions including port based DHCP server, MAC based DHCP server and option 82** for DHCP relay. The network discovery support LLDP and CDP(Cisco Discovery Protocol) that help scan and show whole network topology. The firewall support DoS protection, IP address filter, Mac address filter, source port filter and destination port filter, also include DMZ and port forwarding for virtual server deployed. In the security sensitive application, WDG0200-1ac support a lot of popular VPN and tunneling technology, such as IPSec, L2TP over IPsec client, OpenVPN client and GRE.
Compliant with 802.3af/at standard, the S2000 is able to feed each PoE port up to 30 Watt, 720W totally. Also supports advanced PoE management functions, such as PD detection, scheduling and health tracking. PoE detection can detect if the connected PD status such as enabled/disabled, voltage, current, watt and temperature; scheduling is to allow pre-set power feeding schedule upon routine time table; health tracking can detect PD is alive or not, if PD is dead, will restart it.
WDG0200-1ac provide two gigabit ethernet WAN port that work concurrent. Also support four algorithm to scheduling WAN port traffic, include fixed, failover, priority and round robin that help to appropriate used WAN bandwidth.
Support 801.11a/b/g/n/ac WI-FI, maximum three antenna with 3x3 MIMO, bandwidth up to 1300 Mbps.
VRRP let more availability and reliability in the network. VRRP can automatic choice one router as default gateway(master) and let others as standby(slave).
MAC based DHCP server can assign dedicated IP address by by client’s MAC Address. Option 82 can assign IP address by port for multiple switches with single DHCP option 82 server.
WDG0200-1ac have many useful log for network trouble shutting. Once out of the situation sending SMS**, e-mail, SNMP trap or syslog to the manager immediately.
WDG0200-1ac supports dual DC power supplies DC 9V to 56V input to increase the network reliability.
|Standards||Ethernet: IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Ethernet IEEE 802.3x Flow Control Capability ANSI/IEEE 802.3 Auto-negotiation IEEE 802.1Q VLAN IEEE 802.1AB Link Layer Discovery Protocol (LLDP) WLAN: IEEE 802.11a/n/ac (5GHz) IEEE 802.11b/g/n (2.4GHz)|
|Connectors||2x 10/100/1000T RJ45 with auto MDI/MDI-X function1x RS-232 console (RJ45)1x USB 3.0(Only) for upload/download config file3x SMA connector (for Wi-Fi male)1x 6 pin terminal block (Power)|
|Console Port||Baud rate 115200-8N1|
|WLAN Rate||IEEE802.11b : 1/2/5.5/11 MbpsIEEE802.11a/g : 6/9/12/18/24/36/48/54 MbpsIEEE802.11n : up to 450 MbpsIEEE802.11ac : up to 1300 Mbps|
|WLAN Power (2.4G)||Output Power TX +/- 2dB (per chain) 18dBm @ 1~11Mbps 18dBm @ 6~54Mbps 20dBm @ MCS0~MCS7 (HT20/HT40)Receiver Sensitivity RX +/- 2dB (per chain) ≦-95dBm @ 1~11Mbps ≦-92dBm @ 6~18Mbps ≦-88dBm @ 24Mbps ≦-85dBm @ 36Mbps ≦-81dBm @ 48Mbps ≦-80dBm @ 54Mbps ≦-94dBm @ MCS0 (HT20/HT40) ≦-76dBm @ MCS7 (HT20/HT40)|
|WLAN Power (5G)||Output Power TX +/- 2dB (per chain) 20dBm @ 6~24Mbps 16dBm @ 36~54Mbps 19/18dBm @ MCS0 (HT20/HT40) 16dBm @ MCS7 (HT20/HT40) 18dBm @ MCS0 (VHT20/VHT40/VHT80) 13dBm @ MCS8 (VHT20/VHT40/VHT80) 13dBm @ MCS9 (VHT40/VHT80)Receiver Sensitivity RX +/- 2dB ≦-92dBm @ 6~18Mbps ≦-86dBm @ 24Mbps ≦-84dBm @ 36Mbps ≦-81dBm @ 48Mbps ≦-80dBm @ 54Mbps ≦-93dBm @ MCS0 (HT20/40) ≦-71dBm/≦-80dBm @ MCS7 (HT20/HT40) ≦-90dBm @ MCS0 (VHT20/VHT40/VHT80) ≦-69dBm @ MCS8 (VHT20/VHT40/VHT80) ≦-66dBm @ MCS9 (VHT40/VHT80)|
|Power Supply||Dual input for 9V ~ 56VDC|
|Installation||DIN Rail and Wall Mount Design|
|Management||SNMP v1/v2c/v3, Web (Http/Https), CLI (Telnet/SSH)|
|SNMP MIB||RFC 1215 Traps MIB*,RFC 1213 MIB IIRFC 1158 MIB IIRFC 1157 SNMP MIB,RFC 1493 Bridge MIB*RFC 1573 IF MIBRFC 2674 VLAN MIB*,Partial RFC 1757 RMON,RFC 2674 Q-Bridge MIB*; Bridge MIB,LLDP MIBPrivate MIB|
|Discovery Protocol||LLDP and CDP(Cisco Discovery Protocol)**|
|VLAN||Port Based VLANIEEE 802.1Q Tag VLANVLAN ID(VLAN ID can be assigned from 1 to 4094)|
|SSID||Virtual access point up to 16 SSIDs|
|WMM||Wi-Fi Multimedia (WMM) 802.11e** traffic prioritization|
|Login Security||Supports IEEE802.1X Authentication with RADIUS** and TACACS+**|
|Network Security||HTTPS for secure access to the web interfaceSSH for secure shell to command line interface|
|System Log||Supports System log record to remote server|
|E-Mail/SMS||Supports SMTP Server or cloud server to send event alert. Maximum 8 e-mail accounts for receiving event alert.Also can send event alert via SMS**.|
|SNMP Trap||SNMP trap v1/v2c/v3|
|DHCP||Provide DHCP v4/v6** Client/Server/Relay that support addition option 82**MAC based can assign IP address by specific hostPort based can assign IP address by specific port|
|DNS||Provide DNS client feature and support primary and secondary DNS server|
|SNTP||Supports SNTP to synchronize system clock via Internet|
|VRRP||Up to 5 virtual gateway|
|Load Balancing||Fixed, Failover, Priority and Round robin|
|Tunneling||L2 over GRE|
|VPN Client||IPSecOpenVPNL2TP over IPSec|
|Firmware Update||Supports HTTP/HTTPs/TFTP firmware upgrade|
|Configuration import and export||Supports text configuration file for system quick installation.Support factory reset button to restore all settings back to factory default.Support USB storage backup and restore config file.|
|Power indicator||Power 1 (Green)Power 2 (Green)|
|10/100/1000 Base-T indicator||Orange: Link/ActGreen : 1G Speed|
|WLAN||On (Green), Blinking (Green)|
|Fault||Fault (Red), Blinking (Red)|
|Dimension||Metal case. IP 30, 74mm(W) x 114mm(D) x 152mm(H)|
|Operating Humidity||5% ~ 95% (Non-condensing)|
|Operating Temperature||-20°C~70°C / -4°F~158°F|
|Storage Temperature||-40°C~85°C / -40°F~185°F|
|EMC/EMI/EMS||FCC Part 15 Class A*CE EN55032*CE EN61000-4-2 (ESD)*CE EN61000-4-3 (RS)*CE EN61000-4-4 (EFT)*CE EN61000-4-5 (Surge)*CE EN61000-4-6 (CS)*CE EN61000-4-8*CE EN61000-4-11*NCC|