Industrial DIN-Rail Ethernet Switches

  • Built-in HDMI-over-IP TX/RX extender management controller
  • Maximum 8 ports 1G
  • IEEE802.3at/af PoE, up to 30W per port, 250W power budget totally
  • Advanced PoE management functions, such as PD detection, scheduling and health tracking
  • DHCP server/client/relay, support for additional option 66/82 for network security
  • Dynamic IEEE 802.3ad LACP link aggregation and static link aggregation for optimum bandwidth utilization
  • Support IEEE802.1Q VLAN, port based VLAN and GVRP
  • QoS bandwidth control by 802.1p CoS(Class of service) and DiffServ for ingress and egress, support addition traffic storm control
  • Intelligent Auto AV QoS
  • IGMP snooping v1/v2/v3, IGMP query and MLD snooping v1/v2 for AV network
  • Support LLDP and CDP for network discovery protocols
  • Enhanced ITU G.8032 ring protection. Recovery time less than 50ms for single ring. Also supports multiple mode, such as auto mode, enhanced mode, multi-VLAN and basic mode
  • MSTP up to 16 instances and backward compatible STP and RSTP
  • Port based IEEE802.1X authentication
  • WEB based management UI via HTTP/HTTPs. Also provide CLI, SSH and telnet. All of then support external AAA authentication Services with RADIUS and TACACS+
  • SNMPv1/v2c/v3 for different levels of network management
  • Access control lists (ACL) support L2 and L3 packet filtering increasing the flexibility and security of network management
  • Logging event and warning by exception through SMS, e-mail, SNMP trap and relay output automatic
  • Software upgrade via TFTP,HTTP,HTTPs and SFTP
  • RMON and MIB II for efficient network monitoring and proactive capability bandwidth management prevents unpredictable network status
** means optional

IntrisingTM S1000

PoE at/af ports with advanced PoE management

Compliant with 802.3af/at standard, the S1000 is able to feed each PoE port up to 30 Watt, 250W totally. Also supports advanced PoE management functions, such as PD detection, scheduling and health tracking. PoE detection can detect if the connected PD status such as enabled/disabled, voltage, current, watt and temperature; scheduling is to allow pre-set power feeding schedule upon routine time table; health tracking can detect PD is alive or not, if PD is dead, will restart it.

QoS by VLAN and DiffServ

S1000 support 802.1p CoS(Class of service) QoS by VLAN and DiffServ that greatly enhance the bandwidth management in a network.

IGMPv1/v3/v3 and Router port

IGMPv1/v2/v3 is a importment feature in the AV network. It bring a lot of benefit such as management multicast traffic, save switch bandwidth.

G.8032 ring, 8/16 MSTI MSTP

ITU G.8032 ring which can be self-healed in less than 50ms for single ring topology protection. It also supports various ring topologies that include double ring, multi-chain, basic ring and multiple-VLAN ring. It supports MSTP with up to 8 MSTI that allows each spanning tree for each VLAN for redundant links and backward compatible STP and RSTP.

Port/MAC based DHCP server, option 66/82 and IPv6 DHCP server

Port based DHCP server can assign dedicated IP address by by port, MAC based DHCP server can assign dedicated IP address by by client’s MAC Address. Option 82 can assign IP address by port for multiple switches with single DHCP option 82 server.

Event log and Event Action

In case of event, S1000 have many useful log for network trouble shutting. Once out of the situation S1000 also support send SMS, e-mail, SNMP trap or syslog to the manager immediately.

Dual power DC input

S1000 supports dual DC power supplies DC 9V to 56V input to increase the network reliability.

Industrial hardened design with EFT, SURGE and ESD protection

S1000 is a reliability and robustness coping with extensive EMI/RFI phenomenon, environmental vibration and shocks usually found in factory, substation, steel automation, aviation, mining and process control. It is the best solution for Automation, transportation, surveillance, Wireless backhaul, semiconductor factory applications. S1000 can be used in extreme environments with an operating temperature range of -20°C to 60°C.

Related Product



Standards IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Ethernet
IEEE 802.3x Flow Control Capability
ANSI/IEEE 802.3 Auto-negotiation
IEEE 802.1p Class of Service
IEEE 802.1d Spanning Tree
IEEE 802.1w Rapid Spanning Tree
IEEE 802.1s Multiple Spanning Tree
IEEE 802.3ad Link Aggregation Control Protocol (LACP)
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
IEEE 802.1x User Authentication (Radius)
IEEE 1588 Precision Time Protocol v2
IEEE 802.3at/af PoE
Mac Address 4K MAC address table
Jumbo frame 10KB
Connectors Max 8 10/100/1000T RJ-45 with auto MDI/MDI-X function
RS-232 console(Female DB-9) x1
SIM card slot x 2
SMA connector x6
DIDO : 1 x 6 pin terminal block
Power : 1 x 6 pin terminal block
DI/DO 2 Digital Input (DI) : Level 0: -30~2V / Level 1: 10~30V Max input current:8mA
2 Digital Output(DO): Open collector to 40 VDC, 200mA
Power Supply Dual input for 12V~56VDC(DC model)
PoE Budget 240W for 44V ~ 57V input
120W for 24V input
80W for 12V input
Note: 54V input is recommended for 802.3at 30W application
PoE pin assignment RJ-45 port # 1~#24 support IEEE 802.3at/af
Positive (VCC+): RJ-45 pin 1,2
Negative (VCC-): RJ-45 pin 3,6
Power Consumption 10W
Installation DIN Rail and Wall Mount Design
Warranty 5 years


Management SNMP v1/v2c/v3, WEB/SSH/Telnet/CLI
SNMP MIB RFC 1215 Traps MIB,
RFC 1493 Bridge MIB
Partial RFC 1757 RMON,
RFC 2674 Q-Bridge MIB; Bridge MIB,
Private MIB
ITU G.8032 Support ITU G.8032 v2/2012 for Ring protection in less than 50ms for self-healed recovery for single ring topology. Supports various ring topologies that include double ring, multi-chain, basic ring and multiple-VLAN ring.
PoE Management PoE detection, scheduling, health checking. Per port status include on/off, voltage, current, watts and temperature.
Port Trunk with LACP LACP port trunk up to 8 groups
Discovery Protocol LLDP and CDP(Cisco Discovery Protocol)
Environmental Monitoring System input voltage, current, power consumption ambient temperature
VLAN Port Based VLAN
IEEE 802.1Q Tag VLAN (256 entries)/ VLAN ID(Up to 4K, VLAN ID can be assigned from 1 to 4094)
GVRP, QinQ, QoS QinQ, Protocol based VLAN ; IPv4/IPv6 Subnet based VLAN
IPv6/4 Present
Spanning Tree IEEE802.1d Spanning Tree
IEEE802.1w Rapid Spanning Tree
IEEE802.1s Multiple Spanning Tree 8/16 MSTI
Quality of Service Determined by port, Tag and IPv4 Type of service, IPv4 Differentiated Services Code Points - DSCP
Class of Service IEEE802.1p class of service, per port and provides 8 priority queues
QoS by VLAN Tagged QoS by VLAN for all devices in the network
IP Security Supports 10 IP addresses that have permission to access the switch management and to prevent unauthorized intruder
Login Security Supports IEEE802.1X Authentication with RADIUS and TACACS+
Port Mirror Ingress, Egress or both direction per port
Network Security 802.1X access control for port based and MAC based authentication/static MAC-Port binding
Ingress/Egress L2/L3 ACL
HTTPS for secure access to the web interface
SSH for secure shell to command line interface
IGMP Support IGMP snooping v1/v2/v3; Supports IGMP static route; 1024 multicast groups; IGMP router port ; IGMP query; GMRP
Bandwidth Control Support ingress rate limit and egress rate limit/shaping.
In the ingress direction, packet type(Broadcast/Multicast/Flooded Unicast packet) combination rules are allowed.
Flow Control Supports Flow Control for Full-duplex and Back Pressure for Half-duplex
System Log Supports System log record to remote server
E-Mail/SMS Supports SMTP Server or cloud server to send event alert. Maximum 8 e-mail accounts for receiving event alert.
Also can send event alert via SMS.
Relay Alarm Provides one relay output.
Alarm Relay current carry ability is 1A @ DC24V
SNMP Trap SNMP trap v1/v2c/v3
DHCP Provide DHCP v4/v6 Client/Server/Relay that support addition option 82/66
MAC based can assign IP address by specific host
Port based can assign IP address by specific port
DNS Provide DNS client feature and support primary and secondary DNS server
SNTP Supports SNTP to synchronize system clock via Internet
Firmware Update Supports HTTP/HTTPs/TFTP/SFTP firmware upgrade. TFTP backup and restore
Configuration import and export Supports text configuration file for system quick installation.
Support factory reset button to restore all settings back to factory default.

LED Indicators

Power indicator Power 1 (Green)
Power 2 (Green)
10/100/1000/10G Base indicator Orange: 10Gbps speed
Green : 1G/100M/10Mbps
PoE LEDs On (Green)
R.M LED R.M. (Green)
Fault Fault (Red)

Physical Characteristic

MTBF 830589 hours
Dimension Metal case. IP-30, 74mm(W)x114mm(D)x152mm(H)
Weight 660 g


Operating Humidity 5% ~ 95% (Non-condensing)
Operating Temperature -20°C~60°C / -4°F~140°F
-40°C~75°C / -40°F~167°F
Storage Temperature -40°C~85°C / -40°F~185°F

Regulatory approvals

EMS CE EN55032 Class A, CE EN55024,
CE EN61000-4-2, CE EN61000-4-3,
CE EN61000-4-4, CE EN61000-4-5 Ed.3,
CE EN61000-4-6, CE EN61000-4-8,
CE EN61000-4-11, CE EN50121-4,
CE EN50121-5
Stability IEC 60068-2-32 (Free fall)
IEC 60068-2-27(Shock)
IEC 60068-2-6 (Vibration)