Industrial Center Switches

  • Support IEEE802.3at/af up to 30W per port
  • PoE management incl. Detection and Scheduling
  • ITU G.8032 standard ring protection < 20ms incl. data & multicast* packets; co-exist with RSTP
  • Supports PTP IEEE1588 v2 (under 1μs)
  • Miss-wiring avoidance & Repowered auto ring restore (node failure protection)
  • User friendly UI, including auto topology drawing and DDM threshold monitoring with dB values***; Complete CLI
  • Support LACP link aggregation, IGMP v3/router port, DHCP server, Port&VLAN based DHCP distribution, DHCP Option 82, SSH/SSL, TACAS+*, ACL, IPv6, SMS
  • Environmental Monitoring for temp., voltage & current
  • USB slot for edited restoration and auto backup

OVERVIEW

Intrising CG-244D-P is a high performance L2 + PoE managed industrial switch which provides L2 wire speed and advanced security function for network aggregation and backbone deployment. It delivers ITU G.8032 ring recovery less than 20ms, comprehensive QoS, advanced security including ACL L2/L3, SSH/SSL, DHCP Option 82, DHCP server, IGMPv1/v2/v3/router port, QinQ* (double tag VLAN) , and MVR (multicast VLAN registration), which are important features required in large network. It also supports Cisco Discovery Protocol (CDP) and LLDP for Ciscoworks to detect the switch info and show on L2 map topology.

Intrising CG-244D-P features hardware-based PTP IEEE1588 v2 function which can allow 24 10/100/1000T or 4 1000M SFP uplinks to synchronize the network with precise accuracy (under 1μs). It has RTC (Real Time Clock) inside that can keep track of current time.

Compliant with 802.3af/at standard, the Intrising CG-244D-P is able to feed each PoE port up to 30 Watts@54 VDC providing the connected PD devices. Intrising CG-244D-P supports advanced PoE management including PoE detection and scheduling. PoE detection can detect if the connected PD is hang up then restart the PD; PoE scheduling is to allow pre-set power feeding schedule upon routine time table. Each PoE ports can be Enabled/disabled, get the voltage, current, Watt, and temperature info displayed on WebUI.

The CG-244D-P also embedded several features for stronger and reliable network protection in an easy and intuitive way. When the pre-set ring configuration failed or looped by miss-wiring, Intrising CG-244D-P is able to alert with the LED indicator and send out an email, traps or a SMS text. Repowered auto ring restore function (node failure protection) ensures the switches in a ring to survive after power breakout is back. The status can be shown in NMS when each switch is back. This feature prevents the broken ring and keep ring alive without any re-configuration needed. Loop protection is also available to prevent the generation of broadcast storm when a dumb switch is inserted in a closed loop connection.

DHCP option 82 and relay agent function (port&vlan based DHCP distribution) can offer the same IP address on port base or vlan base where there is need to replace the new device connecting to Intrising switches to avoid any network disruption.

The user friendly UI, innovative auto topology drawing and topology demo makes CG-244D-P much easier to get hands-on. The switch also equips the RTC (real time clock) which can keep track of time always. The CG-244D-P supports DMI interface that can correspond with DDM SFPs (Digital diagnostic monitor) to display the five parameters in Intrising’s UI, including optical output power, input power, temperature, laser bias current and transceiver supply voltage***. The TX power/RX power raw data is automatically converted to dB values for installer, making it easier to calculate the fiber distance. The complete CLI enables professional engineer to configure setting by command line.

Intrising CG-244D-P features ITU G.8032 ring which can be self-healed in less than 20ms for ring/chain topologies which covers data & multicast* packets protection. The innovative auto-Ring configurator (auto mode) can calculate owner and neighbor in single ring which makes ITU G.8032 ring setup never been easier. It supports MSTP that allows RSTP over Vlan for redundant links. The ITU G.8032 Ring and RSTP can be co-existed in the same switch with different ports for the most flexible protection.

The configuration file of Intrising CG-244D-P can be exported in text file so that it can be edited and configured back to switch with ease for mass deployment. The factory reset button can restore the setting back to factory default and built-in watchdog design can automatically reboot the switch when CPU is found dead. The USB slot allows user to backup/ restore configuration.

The CG-244D-P DIDO function can support additional open/close physical contact for designate applications besides Port / Power events, for example, DIDO function can trigger alarm if the switch was moved or stolen. In case of events, the CG-244D-P will immediately send an email & SMS text message to pre-defined addresses as well as SNMP Traps out. It provides 2DI and 2DO while disconnection of the specific port was detected; DO will activate the signal LED to alarm. DI can integrate the sensors for events and DO will trigger the alarm while sending alert information to IP network with email and traps.

The built-in environmental monitoring can detect switch overall temperature, voltage and current where can send the SNMP traps, email and SMS alert when abnormal.

The Intrising CG-244D-P is designed with dual power supply at 12/24/48VDC. Featured with relay contact alarm function, the CG-244D-P is able to connect with alarm system in case of power failure. The CG-244D-P also provides 4000V EFT and 6000V ESD protection, which can reduce unstable situation caused by power line and Ethernet.

Intrising CG-244D-P features high reliability and robustness coping with extensive EMI/RFI phenomenon, environmental vibration and shocks usually found in factory, substation, steel automation, aviation, mining and process control. It is the best solution for Automation, transportation, surveillance, Wireless backhaul, Semi-conductor factory and assembly lines.

The CG-244D-P can be used in extreme environments with an operating temperature range of -20°C to 60°C.

FEATURES

  • 24 10/100/1000T + 4 Dual Speed SFP w/24 PoE 802.3af/at Injectors (Total 28 Ports Switch)
  • Embedded 24 PoE Injectors IEEE802.3af/at function to feed power up to 30W@54V; 15W @ 48V per port for active operation
  • PoE management including PoE detection and scheduling for PD (power devices)
  • IEEE 1588 PTP v2 (under 1μs)
  • Back-plane (Switching Fabric): 56Gbps
  • 16K MAC address table
  • DDM to support SFP diagnostic function***undefined
    • Automatically convert the raw data into dB values for TX power/RX power, making it easier to measure the fiber distance,Automatically convert the raw data into dB values for TX power/RX power, making it easier to measure the fiber distance,Support various ring/chain topologies, including double ring,Ring protection coverage data and multicast* packets,Auto ring configuration(auto mode) for single ring,Co-exist with RSTP on different ports,Ingress packet filter and egress rate limit,Broadcast/multicast packet filter control,LED indicator,Email, traps, or SMS notification,Ensure the switches in a ring to survive after power breakout is back
  • Automatically convert the raw data into dB values for TX power/RX power, making it easier to measure the fiber distance
  • 9KB Jumbo frame supported on all ports
  • User friendly UI, auto topology drawing, topology demo, complete CLI for professional setting
  • ITU G.8032 Ring protection in 20ms < 256 switchesundefined
    • Support various ring/chain topologies, including double ring,Ring protection coverage data and multicast* packets,Auto ring configuration(auto mode) for single ring,Co-exist with RSTP on different ports,Automatically convert the raw data into dB values for TX power/RX power, making it easier to measure the fiber distance,Support various ring/chain topologies, including double ring,Ring protection coverage data and multicast* packets,Auto ring configuration(auto mode) for single ring,Co-exist with RSTP on different ports,Ingress packet filter and egress rate limit,Broadcast/multicast packet filter control,LED indicator,Email, traps, or SMS notification,Ensure the switches in a ring to survive after power breakout is back
  • Support various ring/chain topologies, including double ring
  • Ring protection coverage data and multicast* packets
  • Auto ring configuration(auto mode) for single ring
  • Co-exist with RSTP on different ports
  • Provides EFT protection 4000 VDC for power line.
  • Supports 6000 VDC Ethernet ESD protection
  • LACP load balancing to distribute the load*
  • Built-in RTC (Real Time Clock) to keep track of time
  • Supports IEEE 802.1p Class of Service, per port provides 8 priority queues Port base, Tag Base and Type of Service Priority
  • IEEE 802.1d STP, IEEE 802.1w RSTP,802.1s MSTP VLAN redundancy
  • 4K 802.1Q VLAN, Port based VLAN, GVRP**, QinQ*
  • Supports IEEE 802.1ab LLDP, Cisco CDP; LLDP info can be viewed via Web/ Console/ IntrisingTM InstaConfig**/ IntrisingTM InstaView**
  • DHCP server / client / Port&Vlan based DHCP distribution / DHCP Option 82 supported
  • Bandwidth Controlundefined
    • Ingress packet filter and egress rate limit,Broadcast/multicast packet filter control,Automatically convert the raw data into dB values for TX power/RX power, making it easier to measure the fiber distance,Support various ring/chain topologies, including double ring,Ring protection coverage data and multicast* packets,Auto ring configuration(auto mode) for single ring,Co-exist with RSTP on different ports,Ingress packet filter and egress rate limit,Broadcast/multicast packet filter control,LED indicator,Email, traps, or SMS notification,Ensure the switches in a ring to survive after power breakout is back
  • Ingress packet filter and egress rate limit
  • Broadcast/multicast packet filter control
  • Relay alarm output system events
  • Miss-wiring avoidance undefined
    • LED indicator,Email, traps, or SMS notification,Automatically convert the raw data into dB values for TX power/RX power, making it easier to measure the fiber distance,Support various ring/chain topologies, including double ring,Ring protection coverage data and multicast* packets,Auto ring configuration(auto mode) for single ring,Co-exist with RSTP on different ports,Ingress packet filter and egress rate limit,Broadcast/multicast packet filter control,LED indicator,Email, traps, or SMS notification,Ensure the switches in a ring to survive after power breakout is back
  • LED indicator
  • Email, traps, or SMS notification
  • Repowered auto ring restoreundefined
    • Ensure the switches in a ring to survive after power breakout is back,The status can be shown in NMS when each switch is back,Automatically convert the raw data into dB values for TX power/RX power, making it easier to measure the fiber distance,Support various ring/chain topologies, including double ring,Ring protection coverage data and multicast* packets,Auto ring configuration(auto mode) for single ring,Co-exist with RSTP on different ports,Ingress packet filter and egress rate limit,Broadcast/multicast packet filter control,LED indicator,Email, traps, or SMS notification,Ensure the switches in a ring to survive after power breakout is back
  • Ensure the switches in a ring to survive after power breakout is back
  • The status can be shown in NMS when each switch is back
  • TFTP/HTTP firmware upgrade; IntrisingTM InstaConfig** for multiple upgrade; USB for edited restoration and auto backup
  • System Event Log, SMTP Email alert, SMS mobile (text) and SNMP Trap for alarm support; 32 RMON counters
  • Security undefined
    • SSL/SSH/ACL L2&L3,Port Security: MAC address entries/Filter/MAC-Port binding,IP Security: IP address security management to prevent unauthorized intruder.,Management access control with priority,Login Security: IEEE802.1X/RADIUS,Automatically convert the raw data into dB values for TX power/RX power, making it easier to measure the fiber distance,Support various ring/chain topologies, including double ring,Ring protection coverage data and multicast* packets,Auto ring configuration(auto mode) for single ring,Co-exist with RSTP on different ports,Ingress packet filter and egress rate limit,Broadcast/multicast packet filter control,LED indicator,Email, traps, or SMS notification,Ensure the switches in a ring to survive after power breakout is back
  • SSL/SSH/ACL L2&L3
  • Port Security: MAC address entries/Filter/MAC-Port binding
  • IP Security: IP address security management to prevent unauthorized intruder.
  • Management access control with priority
  • Login Security: IEEE802.1X/RADIUS
  • Static multicast forwarding forward reversed IGMP flow (MVR) with multicast packets binding with ports for IP surveillance application
  • Multicast static route for non- IGMP camera to prevent flooding; IGMP router port to assign query in ring and for reversed multicast video flow
  • Multicast VLAN registration for metro video
  • IGMPv1,v2,v3 with Query mode for multi media; GMRP**
  • Factory reset button to restore setting to factory default
  • Watchdog design to auto reboot switch CPU is found dead
  • Environmental monitoring for system input voltage, current, ambient temperature
  • Supports DIDO (Digital Input/Digital Output)
  • IP30 metal housing with DIN rail and Wall-mount** design
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
No data

ORDER INFORMATION

No data

No data

Model name Discription
AD1240-48S-5 48~56VDC, 4.3A, Wide AC Input, Build-in fan Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)
AD1360-48S-5 48~56VDC, 6.5A, Wide AC Input, Build-in fan Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)
AD1500-48S-5 48~56VDC, 9A, Wide AC Input, Build-in fan Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)