Industrial Center Switches

  • IEC 61850-3 & IEEE1613 compliance*
  • Goose monitoring; Built-in MMS server for power SCADA
  • Support IEEE802.3at/af up to 30W per port
  • PoE management incl. Detection and Scheduling
  • ITU G.8032 standard ring protection < 20ms incl. data & multicast* packets; co-exist with RSTP
  • Miss-wiring avoidance & Repowered auto ring restore (node failure protection)
  • User friendly UI, including auto topology drawing and DDM threshold monitoring with dB values***; Complete CLI
  • Support LACP link aggregation, IGMP v3/router port, DHCP server, Port&VLAN based DHCP distribution, DHCP Option 82, SSH/SSL, TACAS+*, ACL, IPv6, SMS
  • Environmental Monitoring for temp., voltage & current
  • USB slot for edited restoration and auto backup

OVERVIEW

Intrising CE-244D-PT is a high performance L2 + PoE managed industrial IEC61850-3* switch which provides L2 wire speed and advanced security function for network aggregation and backbone deployment. It delivers ITU G.8032 ring recovery less than 20ms, comprehensive QoS, advanced security including ACL L2/L3, SSH/SSL, DHCP Option 82, DHCP server, IGMPv1/v2/v3/router port, QinQ* (double tag VLAN) , and MVR (multicast VLAN registration), which are important features required in large network. It also supports Cisco Discovery Protocol (CDP) and LLDP for Ciscoworks to detect the switch info and show on L2 map topology.

Compliant with IEEE802.3at/af standard, the Intrising CE-244D-PT is able to feed each PoE port up to 30Watts@54VDC providing the connected PD devices at 10/100M speed. It also supports advanced PoE management including PoE detection and scheduling. PoE detection can detect if the connected PD still alive then sending power; PoE scheduling is to allow pre-set power feeding schedule upon routine time table. Per port PoE status explicit voltage, current, watt and poe temperature information.

The exclusive GOOSE monitoring function (IEC packet) can display the counter of GOOSE message transmitted and received by port. The built-in MMS (Manufacturing Messaging Specification) server can help power SCADA to monitor and control switch by data modeling.

The CE-244D-PT also embedded several features for stronger and reliable network protection in an easy and intuitive way. When the pre-set ring configuration failed or looped by miss-wiring, Intrising CE-244D-PT is able to alert with the LED indicator and send out an email, traps or a SMS text. Repowered auto ring restore function (node failure protection) ensures the switches in a ring to survive after power breakout is back. The status can be shown in NMS when each switch is back. This feature prevents the broken ring and keep ring alive without any re-configuration needed. Loop protection is also available to prevent the generation of broadcast storm when a dumb switch is inserted in a closed loop connection.

DHCP option 82 and relay agent function (port&vlan based DHCP distribution) can offer the same IP address on port base or vlan base where there is need to replace the new device connecting to Intrising switches to avoid any network disruption.

The user friendly UI, innovative auto topology drawing and topology demo makes CE-244D-PT much easier to get hands-on. The switch also equips the RTC (real time clock) which can keep track of time always. The CE-244D-PT supports DMI interface that can correspond with DDM SFPs (Digital diagnostic monitor) to display the five parameters in Intrising’s UI, including optical output power, input power, temperature, laser bias current and transceiver supply voltage***. The TX power/RX power raw data is automatically converted to dB values for installer, making it easier to calculate the fiber distance. The complete CLI enables professional engineer to configure setting by command line.

Intrising CE-244D-PT features ITU G.8032 ring which can be self-healed in less than 20ms for ring/chain topologies which covers data & multicast* packets protection. The innovative auto-Ring configurator (auto mode) can calculate owner and neighbor in single ring which makes ITU G.8032 ring setup never been easier. It supports MSTP that allows RSTP over Vlan for redundant links. The ITU G.8032 Ring and RSTP can be co-existed in the same switch with different ports for the most flexible protection.

The configuration file of Intrising CE-244D-PT can be exported in text file so that it can be edited and configured back to switch with ease for mass deployment. The factory reset button can restore the setting back to factory default and built-in watchdog design can automatically reboot the switch when CPU is found dead. The USB slot allows user to backup/ restore configuration.

The CE-244D-PT DIDO function can support additional open/close physical contact for designate applications besides Port / Power events, for example, DIDO function can trigger alarm if the switch was moved or stolen. In case of events, the CE-244D-PT will immediately send an email & SMS text message to pre-defined addresses as well as SNMP Traps out. It provides 2DI and 2DO while disconnection of the specific port was detected; DO will activate the signal LED to alarm. DI can integrate the sensors for events and DO will trigger the alarm while sending alert information to IP network with email and traps.

The environmental monitoring can detect switch overall temperature, voltage and current where can send the SNMP traps, email and SMS alert when abnormal.

Intrising CE-244D-PT supports dual PoE power inputs from DC45~56V. It features high reliability and robustness withstanding extensive EMI/RFI phenomenon, lighting surge, inductive load switching, high ESD, high fault current environment usually found in Substation, Steel automation, Mining and Process control etc. CE-244D-PT can run under widely operational temperature (-40°C~75°C) in the harsh environment.

FEATURES

  • System Interface/Performanceundefined
    • IEC-61850 & IEEE1613 Compliance*,24x10/100TX PoE at/af+ 4 100M/1000M SFP L2+ ,16K MAC Address Table,Dual Power Supply Design for DC(9.5V~60VDC),Dual PoE power input with budget up to 720W,-40to 75C operation temperature(-E model),FAN less design,IEC-61850 & IEEE1613 Compliance*,24x10/100TX PoE at/af+ 4 100M/1000M SFP L2+ ,16K MAC Address Table,Dual Power Supply Design for DC(9.5V~60VDC),Dual PoE power input with budget up to 720W,-40to 75C operation temperature(-E model),FAN less design,Support various ring/chain topologies, including double ring,Auto configurator avoid setting of owner/neighbor/others(auto mode) ,Ring protection coverage data and multicast* packets
  • IEC-61850 & IEEE1613 Compliance*
  • 24x10/100TX PoE at/af+ 4 100M/1000M SFP L2+
  • 16K MAC Address Table
  • Dual Power Supply Design for DC(9.5V~60VDC)
  • Dual PoE power input with budget up to 720W
  • -40to 75C operation temperature(-E model)
  • FAN less design
  • Goose monitoring for port counter of Goose message(IEC packets)
  • MMS server built-in for SCADA monitoring/control
  • User friendly UI, Auto topology drawing, topology demo, Complete CLI for professional setting
  • IP v6/v4 supported
  • ITU G.8032 Ring protection in 20ms < 256 switchesundefined
    • Support various ring/chain topologies, including double ring,Auto configurator avoid setting of owner/neighbor/others(auto mode) ,Ring protection coverage data and multicast* packets,Co-exist with RSTP for different ports,IEC-61850 & IEEE1613 Compliance*,24x10/100TX PoE at/af+ 4 100M/1000M SFP L2+ ,16K MAC Address Table,Dual Power Supply Design for DC(9.5V~60VDC),Dual PoE power input with budget up to 720W,-40to 75C operation temperature(-E model),FAN less design,Support various ring/chain topologies, including double ring,Auto configurator avoid setting of owner/neighbor/others(auto mode) ,Ring protection coverage data and multicast* packets
  • Support various ring/chain topologies, including double ring
  • Auto configurator avoid setting of owner/neighbor/others(auto mode)
  • Ring protection coverage data and multicast* packets
  • Co-exist with RSTP for different ports
  • DDM to support SFP diagnostic function***undefined
    • Automatically convert the raw data into dB values for TX power/RX power, making it easier to measure the fiber distance ,IEC-61850 & IEEE1613 Compliance*,24x10/100TX PoE at/af+ 4 100M/1000M SFP L2+ ,16K MAC Address Table,Dual Power Supply Design for DC(9.5V~60VDC),Dual PoE power input with budget up to 720W,-40to 75C operation temperature(-E model),FAN less design,Support various ring/chain topologies, including double ring,Auto configurator avoid setting of owner/neighbor/others(auto mode) ,Ring protection coverage data and multicast* packets
  • Automatically convert the raw data into dB values for TX power/RX power, making it easier to measure the fiber distance
  • 256 groups MSTP over VLAN
  • VLAN undefined
    • 4K 802.1Q Vlan, Port Based VLAN,GVRP*GMRP*, QinQ*,IEC-61850 & IEEE1613 Compliance*,24x10/100TX PoE at/af+ 4 100M/1000M SFP L2+ ,16K MAC Address Table,Dual Power Supply Design for DC(9.5V~60VDC),Dual PoE power input with budget up to 720W,-40to 75C operation temperature(-E model),FAN less design,Support various ring/chain topologies, including double ring,Auto configurator avoid setting of owner/neighbor/others(auto mode) ,Ring protection coverage data and multicast* packets
  • 4K 802.1Q Vlan, Port Based VLAN,GVRP*GMRP*, QinQ*
  • Port Trunk with LACP 14 trunks with automatic link failover
  • LACP link aggregation to add bandwidth
  • QoS (Quality of Service) undefined
    • Supports IEEE 802.1p CoS ,Per port provides 8 priority queues,Port-base,Tag-base and TOS Priority,Strict priority and WRR,IEC-61850 & IEEE1613 Compliance*,24x10/100TX PoE at/af+ 4 100M/1000M SFP L2+ ,16K MAC Address Table,Dual Power Supply Design for DC(9.5V~60VDC),Dual PoE power input with budget up to 720W,-40to 75C operation temperature(-E model),FAN less design,Support various ring/chain topologies, including double ring,Auto configurator avoid setting of owner/neighbor/others(auto mode) ,Ring protection coverage data and multicast* packets
  • Supports IEEE 802.1p CoS
  • Per port provides 8 priority queues
  • Port-base,Tag-base and TOS Priority
  • Strict priority and WRR
  • Security undefined
    • SSL/SSH/TACAS+*/ACL,Port Security: MAC address entries/Filter/MAC-IP-Port binding,IP Security: IP address security management to prevent unauthorized intruder.,Account permission access control ,Login Security: IEEE802.1X/RADIUS,IEC-61850 & IEEE1613 Compliance*,24x10/100TX PoE at/af+ 4 100M/1000M SFP L2+ ,16K MAC Address Table,Dual Power Supply Design for DC(9.5V~60VDC),Dual PoE power input with budget up to 720W,-40to 75C operation temperature(-E model),FAN less design,Support various ring/chain topologies, including double ring,Auto configurator avoid setting of owner/neighbor/others(auto mode) ,Ring protection coverage data and multicast* packets
  • SSL/SSH/TACAS+*/ACL
  • Port Security: MAC address entries/Filter/MAC-IP-Port binding
  • IP Security: IP address security management to prevent unauthorized intruder.
  • Account permission access control
  • Login Security: IEEE802.1X/RADIUS
  • Miss-wiring avoidance undefined
    • LED indicator,Email, traps, or SMS notification,IEC-61850 & IEEE1613 Compliance*,24x10/100TX PoE at/af+ 4 100M/1000M SFP L2+ ,16K MAC Address Table,Dual Power Supply Design for DC(9.5V~60VDC),Dual PoE power input with budget up to 720W,-40to 75C operation temperature(-E model),FAN less design,Support various ring/chain topologies, including double ring,Auto configurator avoid setting of owner/neighbor/others(auto mode) ,Ring protection coverage data and multicast* packets
  • LED indicator
  • Email, traps, or SMS notification
  • Repowered auto ring restore(node failure protection)undefined
    • Ensure the switches in a ring to survive after power breakout is back ,The status can be shown in NMS when each switch is back ,IEC-61850 & IEEE1613 Compliance*,24x10/100TX PoE at/af+ 4 100M/1000M SFP L2+ ,16K MAC Address Table,Dual Power Supply Design for DC(9.5V~60VDC),Dual PoE power input with budget up to 720W,-40to 75C operation temperature(-E model),FAN less design,Support various ring/chain topologies, including double ring,Auto configurator avoid setting of owner/neighbor/others(auto mode) ,Ring protection coverage data and multicast* packets
  • Ensure the switches in a ring to survive after power breakout is back
  • The status can be shown in NMS when each switch is back
  • IGMP v1,v2,v3 and Proxy** for Multi Media Application
  • IGMP router to select another Query mode and support IGMP static routing for reversed IGMP flow (MVR) to bind with port for IP surveillance application
  • IEEE 1588 PTP v2(under 1μs) for gigabit ports; SNTP, NTP supported
  • Supports IEEE802.1ab LLDP, Cisco CDP
  • DHCP server / client / DHCP Option 82/ DHCP relay agent
  • Bandwidth Control undefined
    • Ingress Packet Filter and Egress Rate Limit,Broadcast/Multicast Packet Filter Control,IEC-61850 & IEEE1613 Compliance*,24x10/100TX PoE at/af+ 4 100M/1000M SFP L2+ ,16K MAC Address Table,Dual Power Supply Design for DC(9.5V~60VDC),Dual PoE power input with budget up to 720W,-40to 75C operation temperature(-E model),FAN less design,Support various ring/chain topologies, including double ring,Auto configurator avoid setting of owner/neighbor/others(auto mode) ,Ring protection coverage data and multicast* packets
  • Ingress Packet Filter and Egress Rate Limit
  • Broadcast/Multicast Packet Filter Control
  • System Event Log, Email alert, SMS(mobile text) and SNMP Trap for alarm support
  • Environmental sensor built-in to detect temperature, voltage, current and total PoE load and send out SNMP traps , SMS and emails if there is abnormal events
  • TFTP/HTTP firmware upgrade; IntrisingTM InstaConfig** for multiple upgrade; USB for edited restoration and auto backup
  • Reset / Factory default button to restore factory setting
  • Watch dog design to reboot switch if CPU is found dead
  • Provides EFT protection 4K VDC for power line
  • Supports 8KV contact & 15KV air Ethernet ESD protection
  • 2 DI/DO and 1 relay contact alarm
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
No data

ORDER INFORMATION

No data

No data

Model name Discription
AD1240-48S-5 48~56VDC, 4.3A, Wide AC Input, Build-in fan Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)
AD1360-48S-5 48~56VDC, 6.5A, Wide AC Input, Build-in fan Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)
AD1500-48S-5 48~56VDC, 9A, Wide AC Input, Build-in fan Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)