Industrial Center Switches

  • High-density 10/100TX L2+ managed PoE at/af switch
  • Supports ITU G.8032 ring/chain< 20ms; Co-exist with RSTP
  • Supports PoE management
  • Support LACP link aggregation, IGMP v3/router port, DHCP server, Port&VLAN based DHCP distribution, DHCP Option 82, SSH/SSL, TACAS+*, ACL, IPv6, SMS
  • Support relay contact DIDO & Environmental Monitoring for real time voltage, current, and case ambient temperature
  • Miss-wiring avoidance & Repowered auto ring restore
  • User friendly UI, including auto topology drawing and DDM threshold monitoring with dB values***, Complete CLI supported
  • USB slot for edited restoration and auto backup

OVERVIEW

Intrising CE-244D-P is a high performance L2 + PoE managed industrial switch which provides L2 wire speed and advanced security function for network aggregation and backbone deployment. It delivers ITU G.8032 ring recovery less than 20ms, comprehensive QoS, advanced security including ACL L2/L3, SSH/SSL, DHCP Option 82, DHCP server, IGMPv1/v2/v3/router port, QinQ* (double tag VLAN) , and MVR (multicast VLAN registration), which are important features required in large network. It also supports Cisco Discovery Protocol (CDP) and LLDP for Ciscoworks to detect the switch info and show on L2 map topology.

Compliant with IEEE802.3at/af standard, the Intrising CE-244D-P is able to feed each PoE port up to 30Watts@54VDC providing the connected PD devices at Gigabit speed. It also supports advanced PoE management including PoE detection and scheduling. PoE detection can detect if the connected PD is still alive then sending power; PoE scheduling is to allow pre-set power feeding schedule upon routine time table. Per port PoE status explicits voltage, current, watt and poe temperature information.

The ITU G.8032 ring protection can work with other metro switches for ring protection in less than 20ms that is faster than other market products, plus it covers the data & multicast* packets protection in versatile topologies. It supports MSTP that allows RSTP over Vlan for redundant VLAN links. The embedded WEB UI supports auto topology drawing when the switches are connected in a ring in which each node’s detail can be shown in the drawing. Auto mode for single ring configuration is to calculate owner, neighbor and others automatically that makes the setup never been easier.

The CE-244D-P also embedded several features for stronger and reliable network protection in an easy and intuitive way. When the pre-set ring configuration failed or looped by miss-wiring, Intrising CE-244D-P is able to alert with the LED indicator and send out an email, traps or a SMS text. Repowered auto ring restore function (node failure protection) ensures the switches in a ring to survive after power breakout is back. The status can be shown in NMS when each switch is back. This feature prevents the broken ring and keep ring alive without any re-configuration needed when power back. Loop protection is also available to prevent the generation of broadcast storm when a dumb switch is inserted in a closed loop connection.

DHCP option 82 and relay agent function (port&vlan based DHCP distribution) can offer the same IP address on port base or vlan base where there is need to replace the new device connecting to Intrising switches to avoid any network disruption.

The user friendly UI, innovative auto topology drawing and topology demo makes CE-244D-P much easier to get hands-on. The CE-244D-P supports DMI interface that can correspond with DDM SFPs (Digital diagnostic monitor) to display the five parameters in Intrising’s UI, including optical output power, input power, temperature, laser bias current and transceiver supply voltage***. The TX power/RX power raw data is automatically converted to dB values for installer, making it easier to calculate the fiber distance. The complete CLI support allows professional setting. undefined

Intrising CE-244D-P can export the configuration in editable configuration file making the mass deployment easier.

The exclusive environmental monitoring function provides real-time status for input voltage, current and case ambient temperature where can set SMS text, email or trap alert when abnormal.

Intrising CE-244D-P configuration can be exported and editable which makes the mass deployment easier. Also, it designs with a factory reset button where user can reset all settings to factory default. The built-in watch dog design can reboot switch automatically when CPU is found dead. CE-244D-P supports USB dongle where can automatically back up the configuration or editable restoration for easy maintenance swapping a broken switch.

The CE-244D-P DIDO function can support additional open/close physical contact for designate applications besides Port / Power events, for example, DIDO function can trigger alarm if the switch was moved or stolen. In case of events, the CE-244D-P will immediately send an email, SMS text to pre-defined addresses as well as SNMP Traps out. It provides 2DI and 2DO while disconnection of the specific port was detected; DO will activate the signal LED to alarm. DI can integrate the sensors into the auto alarm system and transfer the alarm information to IP network with email, text and SNMP.

Intrising CE-244D-P supports dual PoE power inputs from DC45~56V. It features high reliability and robustness withstanding extensive EMI/RFI phenomenon, lighting surge, inductive load switching, high ESD, high fault current environment usually found in Substation, Steel automation, Mining and Process control etc. Supporting the latest EEE (Efficient Energy Ethernet) standard, CE-244D-P can run under widely operational temperature (-40°C~75°C) in the harsh environment.

FEATURES

  • System Interface/Performanceundefined
    • 24x10/100TX PoE at/af+ 4 100M/1000M SFP L2+ ,16K MAC Address Table,Dual Power Supply Design for DC(9.5V~60VDC),Dual PoE power input with budget up to 720W,-40to 75C operation temperature(-E model),24x10/100TX PoE at/af+ 4 100M/1000M SFP L2+ ,16K MAC Address Table,Dual Power Supply Design for DC(9.5V~60VDC),Dual PoE power input with budget up to 720W,-40to 75C operation temperature(-E model),Automatically convert the raw data into dB values for TX power/RX power, making it easier to measure the fiber distance ,4K 802.1Q Vlan, Port Based VLAN,GVRP**,QinQ,MVRP*,Port Security: MAC address entries/filter; port lock ,IP address security for management interface (SNMP, Telnet, Web),SSH/SSL
  • 24x10/100TX PoE at/af+ 4 100M/1000M SFP L2+
  • 16K MAC Address Table
  • Dual Power Supply Design for DC(9.5V~60VDC)
  • Dual PoE power input with budget up to 720W
  • -40to 75C operation temperature(-E model)
  • PoE management including PoE detection and scheduling for PD (power devices); per Port PoE status includes voltage, current, watt and PoE temperature
  • DDM to support SFP diagnostic function***undefined
    • Automatically convert the raw data into dB values for TX power/RX power, making it easier to measure the fiber distance ,24x10/100TX PoE at/af+ 4 100M/1000M SFP L2+ ,16K MAC Address Table,Dual Power Supply Design for DC(9.5V~60VDC),Dual PoE power input with budget up to 720W,-40to 75C operation temperature(-E model),Automatically convert the raw data into dB values for TX power/RX power, making it easier to measure the fiber distance ,4K 802.1Q Vlan, Port Based VLAN,GVRP**,QinQ,MVRP*,Port Security: MAC address entries/filter; port lock ,IP address security for management interface (SNMP, Telnet, Web),SSH/SSL
  • Automatically convert the raw data into dB values for TX power/RX power, making it easier to measure the fiber distance
  • VLANundefined
    • 4K 802.1Q Vlan, Port Based VLAN,GVRP**,QinQ,MVRP*,24x10/100TX PoE at/af+ 4 100M/1000M SFP L2+ ,16K MAC Address Table,Dual Power Supply Design for DC(9.5V~60VDC),Dual PoE power input with budget up to 720W,-40to 75C operation temperature(-E model),Automatically convert the raw data into dB values for TX power/RX power, making it easier to measure the fiber distance ,4K 802.1Q Vlan, Port Based VLAN,GVRP**,QinQ,MVRP*,Port Security: MAC address entries/filter; port lock ,IP address security for management interface (SNMP, Telnet, Web),SSH/SSL
  • 4K 802.1Q Vlan, Port Based VLAN,GVRP**,QinQ,MVRP*
  • Port Trunk with LACP 127 trunks with automatic link failover
  • QoS (Quality of Service)
  • Port Trunk with LACP 127 trunks with automatic link failover
  • Security undefined
    • Port Security: MAC address entries/filter; port lock ,IP address security for management interface (SNMP, Telnet, Web),SSH/SSL ,256 policy base ACL, TACAS+*,Login Security: IEEE 802.1X/RADIUS,24x10/100TX PoE at/af+ 4 100M/1000M SFP L2+ ,16K MAC Address Table,Dual Power Supply Design for DC(9.5V~60VDC),Dual PoE power input with budget up to 720W,-40to 75C operation temperature(-E model),Automatically convert the raw data into dB values for TX power/RX power, making it easier to measure the fiber distance ,4K 802.1Q Vlan, Port Based VLAN,GVRP**,QinQ,MVRP*,Port Security: MAC address entries/filter; port lock ,IP address security for management interface (SNMP, Telnet, Web),SSH/SSL
  • Port Security: MAC address entries/filter; port lock
  • IP address security for management interface (SNMP, Telnet, Web)
  • SSH/SSL
  • 256 policy base ACL, TACAS+*
  • Login Security: IEEE 802.1X/RADIUS
  • Miss-wiring avoidance undefined
    • LED indicator,Email, traps, or SMS notification,24x10/100TX PoE at/af+ 4 100M/1000M SFP L2+ ,16K MAC Address Table,Dual Power Supply Design for DC(9.5V~60VDC),Dual PoE power input with budget up to 720W,-40to 75C operation temperature(-E model),Automatically convert the raw data into dB values for TX power/RX power, making it easier to measure the fiber distance ,4K 802.1Q Vlan, Port Based VLAN,GVRP**,QinQ,MVRP*,Port Security: MAC address entries/filter; port lock ,IP address security for management interface (SNMP, Telnet, Web),SSH/SSL
  • LED indicator
  • Email, traps, or SMS notification
  • Repowered auto ring restore (node failure protection)undefined
    • Ensure the switches in a ring to survive after power breakout is back,The status can be shown in NMS when each switch is back,24x10/100TX PoE at/af+ 4 100M/1000M SFP L2+ ,16K MAC Address Table,Dual Power Supply Design for DC(9.5V~60VDC),Dual PoE power input with budget up to 720W,-40to 75C operation temperature(-E model),Automatically convert the raw data into dB values for TX power/RX power, making it easier to measure the fiber distance ,4K 802.1Q Vlan, Port Based VLAN,GVRP**,QinQ,MVRP*,Port Security: MAC address entries/filter; port lock ,IP address security for management interface (SNMP, Telnet, Web),SSH/SSL
  • Ensure the switches in a ring to survive after power breakout is back
  • The status can be shown in NMS when each switch is back
  • IGMP v1,v2,v3 for video surveillance application; GMRP**
  • IGMP Query mode and support dynamic IGMP router port for reversed multicast video flow and assign another query in a ring
  • IGMP static route for reversed IGMP flow (MVR) to bind with port for non-IGMP cameras.
  •  ITU G.8032 Ring protection in 20ms < 256 switchesundefined
    • Support various ring/chain topologies, including double ring,Ring protection coverage data and multicast* packets,24x10/100TX PoE at/af+ 4 100M/1000M SFP L2+ ,16K MAC Address Table,Dual Power Supply Design for DC(9.5V~60VDC),Dual PoE power input with budget up to 720W,-40to 75C operation temperature(-E model),Automatically convert the raw data into dB values for TX power/RX power, making it easier to measure the fiber distance ,4K 802.1Q Vlan, Port Based VLAN,GVRP**,QinQ,MVRP*,Port Security: MAC address entries/filter; port lock ,IP address security for management interface (SNMP, Telnet, Web),SSH/SSL
  • Support various ring/chain topologies, including double ring
  • Ring protection coverage data and multicast* packets
  • Auto topology drawing in web UI with detail node info
  • Auto configurator for auto ITU ring setup
  • 256 groups MSTP over VLAN
  • Supports IEEE802.1ab LLDP, Cisco CDP
  • DHCP server / client / Port&Vlan based DHCP distribution / DHCP Option 82 supported
  • Bandwidth Control undefined
    • Ingress Packet Filter and Egress Rate Limit,Broadcast/Multicast Packet Filter Control,24x10/100TX PoE at/af+ 4 100M/1000M SFP L2+ ,16K MAC Address Table,Dual Power Supply Design for DC(9.5V~60VDC),Dual PoE power input with budget up to 720W,-40to 75C operation temperature(-E model),Automatically convert the raw data into dB values for TX power/RX power, making it easier to measure the fiber distance ,4K 802.1Q Vlan, Port Based VLAN,GVRP**,QinQ,MVRP*,Port Security: MAC address entries/filter; port lock ,IP address security for management interface (SNMP, Telnet, Web),SSH/SSL
  • Ingress Packet Filter and Egress Rate Limit
  • Broadcast/Multicast Packet Filter Control
  • System Event Log, Email alert, SMS(mobile text) and SNMP Trap for alarm support; 32 RMON
  • TFTP/HTTP Firmware upgrade; Redundant firmware to avoid crashing in case of upgrade failure
  • Reset / Factory default button to restore factory setting
  • Watch dog design to reboot switch under certain circumstances
  • Provides EFT protection 4000 VDC for power line
  • Supports 6000 VDC Ethernet ESD protection
  • 2 DI/DO and 1 relay contact alarm
  • Support USB dongle for auto backup/edited restoration configuration
  • Environmental sensor to detect temperature, voltage,  current and total PoE to send out SMS text, SNMP traps and emails if there is abnormal events
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{hwpindex}}
{{tval}}
{{hwtdtkey}}

{{tval}}

{{hwtoval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
{{pindex}}
{{tval}}
{{tdtkey}}

{{tval}}

{{toval}}
No data

ORDER INFORMATION

No data

No data

Model name Discription
AD1240-48S-5 48~56VDC, 4.3A, Wide AC Input, Build-in fan Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)
AD1360-48S-5 48~56VDC, 6.5A, Wide AC Input, Build-in fan Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)
AD1500-48S-5 48~56VDC, 9A, Wide AC Input, Build-in fan Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)