Industrial Center Switches

S3000-24x10GT+8x10GF

  • Built-in HDMI-over-IP TX/RX extender management controller
  • There are several modules selectable
  • Maximum 24x10GT+8x10GF
  • Maximum up to 24x IEEE802.3af / 802.3at PoE+ output, 30W per port, 480W PoE power budget in total
  • Advanced PoE management functions, such as PD detection, scheduling, and health tracking
  • Supports IEEE-1588 PTP V2 for precise time synchronization to operate in Ordinary-Boundary, Peer to Peer Transparent Clock, End to End Transparent Clock, Master, Slave mode by each port
  • DHCP server/client/relay, support addition option 66/82 for network security
  • Dynamic IEEE 802.3ad LACP link aggregation and static link aggregation for optimum bandwidth utilization
  • Support IEEE802.1Q VLAN, port-based VLAN and GVRP
  • Advanced VLAN translation and capability with Q-in-Q tagging
  • QoS bandwidth control by 802.1p CoS(Class of service) and DiffServ for ingress and egress, support addition traffic storm control
  • Intelligent Auto AV QoS
  • IGMP snooping v1/v2/v3, IGMP query and IPv6 MLD snooping v1/v2 for AV network
  • Support LLDP and CDP for network discovery protocols
  • Enhanced ITU G.8032 ring protection. Recovery time less than 20ms at max 250 switches for single ring
  • MSTP up to 16 instances and backward compatible STP and RSTP
  • Port-based IEEE802.1X authentication
  • WEB based management UI via HTTP/HTTPs. Also provide CLI, SSH, and telnet. All of then support external AAA authentication Services with RADIUS and TACACS+
  • SNMPv1/v2c/v3 for different levels of network management
  • Access control lists (ACL) support L2 and L3 packet filtering increase the flexibility and security of network management
  • Logging event and warning by exception through SMS, e-mail, SNMP trap and relay output automatic
  • Software upgrade via TFTP, HTTP/HTTPs also support redundant firmware to avoid in case of upgrade failure
  • RMON and MIB II for efficient network monitoring and proactive capability bandwidth management prevents unpredictable network status
  • Redundant dual AC input power 100V to 240V
** means optional

IntrisingTM S3000-24x10GT+8x10GF

IntrisingTM S3000-24x10GT+8x10GF ‬is a high-performance L2+‭ ‬Ethernet switch w‭/ ‬PoE‭+ ‬802.3af/at per port 30W which provides L2+‭ ‬wire speed and management functions for network deployment‭. ‬In the redundancy‭, ‬It delivers ITU G.8032‭ ‬ring recovery less than 20ms‭‭. ‬It can help optimize network traffic by comprehensive QoS‭. ‬Security functions including L2‭/‬L3‭ ‬ingress and egress ACL‭, ‬port-based DHCP server‭, ‬MAC-based DHCP server‭, ‬also include option 82/66‭ ‬for DHCP relay‭. ‬In order optimization AV traffic‭, ‬it provides Intelligent Auto AV QoS‭, ‬IGMP v1‭/‬v2‭/‬v3‭ ‬, and router port support‭, ‬which are essential features required in the AV network‭. ‬The network discovery support LLDP and CDP(Cisco Discovery Protocol‭) ‬that help scan and show whole network topology‭.‬

PoE at/af ports with advanced PoE management

Compliant with 802.3af/at standard, the S3000-24x10GT+8x10GF can feed each PoE port up to 30 Watt, max power budget 480W. Also supports advanced PoE management functions, such as PD detection, scheduling, and health tracking. PoE detection can detect if the connected PD status such as enabled/disabled, voltage, current, watt and temperature; scheduling is to allow pre-set power feeding schedule upon routine time table; health tracking can detect PD is alive or not, if PD is dead, will restart it.

QoS by VLAN and DiffServ

S3000-24x10GT+8x10GF support 802.1p CoS(Class of service) QoS by VLAN and DiffServ that greatly enhance the bandwidth management in a network.

IGMPv1/v3/v3 and Router port

IGMPv1/v2/v3 is an important feature in the AV network. It brings a lot of benefit such as management multicast traffic, saves switch bandwidth.

G.8032 ring, max 16 MSTI MSTP

ITU G.8032 ring which can be self-healed in less than 20ms at max 250 switches for single ring topology protection. It also supports various ring topologies such as a double ring, multi-chain and so on. It supports MSTP with up to 16 MSTI that allows each spanning tree for each VLAN for redundant links and backward compatible STP and RSTP.

Port/MAC based DHCP server, option 66/82 and IPv6 DHCP server

A port-based DHCP server can assign a dedicated IP address by port, MAC-based DHCP server can assign a dedicated IP address by the client’s MAC Address. Option 82 can assign an IP address by a port for multiple switches with a single DHCP option 82 server.

Event log and Event Action

In the case of the event, S3000-24x10GT+8x10GF have many useful logs for network troubleshooting. Once out of the situation S3000-24x10GT+8x10GF could send SMS, e-mail, SNMP trap or syslog to the manager immediately.

Dual power AV input

S3000-24x10GT+8x10GF chassis and modules are designed for easy maintenance and installation. It also supports dual AC input power 100V to 240V input to increase network reliability.

Related Product

HX01-R
HX01-T
HX01-R
HX01-T
HT01-R
HT01-T
IntriController

Hardware

Standards IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Ethernet
IEEE 802.3ab 1000Base-T Ethernet
IEEE 802.3z Gigabit Fiber
IEEE 802.3ae 10G Ethernet over Fiber
IEEE 802.3an 10G Copper
IEEE 802.3x Flow Control Capability
ANSI/IEEE 802.3 Auto-negotiation
IEEE 802.1Q VLAN
IEEE 802.1p Class of Service
IEEE 802.1X Access Control
IEEE 802.1D Spanning Tree
IEEE 802.1w Rapid Spanning Tree
IEEE 802.1s Multiple Spanning Tree
IEEE 802.3ad Link Aggregation Control Protocol (LACP)
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
IEEE 802.1x User Authentication (Radius)
IEEE 1588 Precision Time Protocol v2
IEEE 802.3 at/af PoE
MAC Address 32K
Jumbo frame 10 KB
Connectors Max 24x 10/100/1000T RJ-45 with auto MDI/MDI-X function
Max 24x 1000M Mini-GBIC : SFP sockets
Max 24x 10G Mini-GBIC : SFP+ sockets
Max 8x 40G Mini-GBIC : QSFP+ sockets
Mini-USB console x1
USB 3.0 x2 for import/export configuration file or upgrade firmware
DIDO : 6 pins terminal block
Maintenance port: RJ45 x 1
Transfer Rate 14,880 pps for Ethernet port
148,800 pps for Fast Ethernet port
1,488,000 pps for Gigabit Fiber Ethernet port
14,880,000 pps for 10 Gigabit Fiber Ethernet port
DI/DO 2 Digital Input (DI) : Level 0: -30~2V / Level 1: 10~30V Max input current:8mA
2 Digital Output(DO): Open collector to 40 VDC, 200mA
Power Supply Dual input for AC 100V to 240V
PoE Budget 480W in total. Per port up to 30W
PoE pin assignment RJ-45 port # 1~#24 support IEEE 802.3at/af End-point
Positive (VCC+): RJ-45 pin 1,2.
Negative (VCC-): RJ-45 pin 3,6.
Installation 19-inch rack mounting (1U)
Warranty 2 years

Software

Management SNMP v1/v2c/v3, WEB/SSH/Telnet/CLI
SNMP MIB RFC 1215 Traps MIB,
RFC 1213 MIB II
RFC 1158 MIB II
RFC 1157 SNMP MIB,
RFC 1493 Bridge MIB
RFC 1573 IF MIB
RFC 2674 VLAN MIB,
Partial RFC 1757 RMON,
RFC 2674 Q-Bridge MIB; Bridge MIB,
LLDP MIB
RSTP MIB
Private MIB
ITU G.8032 Support ITU G.8032 v2/2012 for Ring protection in less than 50ms for self-healed recovery for single ring topology. Supports various ring topologies that include double ring, multi-chain, basic ring and multiple-VLAN ring
PoE Management PoE detection, scheduling, health checking. Per port status include on/off, voltage, current, watts and temperature
Port Trunk with LACP LACP port trunk up to 8 groups
Discovery Protocol LLDP and CDP(Cisco Discovery Protocol)
Environmental Monitoring System input voltage, current, power consumption ambient temperature
VLAN Port Based VLAN
IEEE 802.1Q Tag VLAN (256 entries)/ VLAN ID(Up to 4K, VLAN ID can be assigned from 1 to 4094)
GVRP, QinQ, QoS QinQ, Protocol based VLAN ; IPv4/IPv6 Subnet based VLAN
IPv6/4 Present
Spanning Tree IEEE802.1d Spanning Tree
IEEE802.1w Rapid Spanning Tree
IEEE802.1s Multiple Spanning Tree max 16 MSTI
Quality of Service Determined by port, Tag and IPv4 Type of service, IPv4 Differentiated Services Code Points - DSCP
Class of Service IEEE802.1p class of service, per port and provides 8 priority queues
QoS by VLAN Tagged QoS by VLAN for all devices in the network
IP Security Supports 10 IP addresses that have permission to access the switch management and to prevent unauthorized intruder
Login Security Supports IEEE802.1X Authentication with RADIUS and TACACS+
Port Mirror Ingress, Egress or both direction per port
Network Security 802.1X access control for port based and MAC based authentication/static MAC-Port binding
Ingress/Egress L2/L3 ACL
HTTPS for secure access to the web interface
SSH for secure shell to command line interface
IGMP Support IGMP snooping v1/v2/v3; Supports IGMP static route; 1024 multicast groups; IGMP router port ; IGMP query; GMRP
Bandwidth Control Support ingress rate limit and egress rate limit/shaping.
In the ingress direction, packet type(Broadcast/Multicast/Flooded Unicast packet) combination rules are allowed.
Flow Control Supports Flow Control for Full-duplex and Back Pressure for Half-duplex
System Log Supports System log record to remote server
E-Mail/SMS Supports SMTP Server or cloud server to send event alert. Maximum 8 email accounts for receiving event alert.
Also can send event alert via SMS.
Relay Alarm Provides one relay output.
Alarm Relay current carry ability is 1A @ DC24V
SNMP Trap SNMP trap v1/v2c/v3
DHCP Provide DHCP v4/v6 Client/Server/Relay that support addition option 82/66
MAC based can assign IP address by specific host
Port based can assign IP address by specific port
DNS Provide DNS client feature and support primary and secondary DNS server
SNTP Supports SNTP to synchronize system clock via Internet
Firmware Update Supports HTTP/HTTPs/TFTP firmware upgrade. TFTP backup and restore
Configuration import and export Supports text configuration file for system quick installation.
Support factory reset button to restore all settings back to factory default.
Support USB storage backup and restore config file.
PTP IEEE-1588 PTP V2 for precise time synchronization to operate in Ordinary-Boundary, Peer to Peer Transparent Clock, End to End Transparent Clock, Master, Slave mode by each port

LED Indicator

Power indicator Power 1 (Green)
Power 2 (Green)
10/100/1000/10G Base indicator Orange: 10Gbps speed
Green : 1G/100M/10Mbps
PoE LEDs On (Green)
R.M LED R.M. (Green)
Fault Fault (Red)

Physical Characteristic

MTBF 830589 hours
Dimension 438mm(W)x420mm(D)x44mm(H)
Weight 6.83 kg

Environmental

Operating Humidity 5 to 90% (non-condensing)
Operating Temperature -20°C~60°C / -4°F~140°F
-40°C~75°C / -40°F~167°F
Storage Temperature -40°C~85°C / -40°F~185°F

Regulatory approvals

EMI FCC-----EMI----Part 15B
EMS CE-------EMC---EN 55032
CE-------EMC---EN 55025
Stability Testing IEC 60068-2-14 ---------------------------------------Operating Temperature and Humidity Cycle Test
IEC 60068-2-3 -----------------------------------------High Temperature Operating Test
IEC 60068-2-1 / IEC 60068-2-3 -------------------Power On/Off and Cold Start Test
IEC 60068-2-6 / IEC 60068-2-59 -----------------Vibration Test
IEC 60068-2-57 / IEC 60068-2-64 ---------------Vibration Test
ISTA 2A STD ------------------------------------------- Vibration Test
ISTA 2A STD ------------------------------------------- Package Drop Test
ISO 11201:2010/ISO 7779:2010/ Annex C. -- Acoustic Noise Test
Power Consumption Measurement
Four-Corner Temperature and Input Voltage Variation
Safety CB-------IEC/EN 60950-1
CB-------IEC/EN 62368-1