IntrisingTM S3000-16x10G+2x40G is a high-performance L2+ Ethernet switch w/ PoE+ 802.3af/at per port 30W which provides L2+ wire speed and management functions for network deployment. In the redundancy, It delivers ITU G.8032 ring recovery less than 20ms. It can help optimize network traffic by comprehensive QoS. Security functions including L2/L3 ingress and egress ACL, port-based DHCP server, MAC-based DHCP server, also include option 82/66 for DHCP relay. In order optimization AV traffic, it provides Intelligent Auto AV QoS, IGMP v1/v2/v3 , and router port support, which are essential features required in the AV network. The network discovery support LLDP and CDP(Cisco Discovery Protocol) that help scan and show whole network topology.
Compliant with 802.3af/at standard, the S3000-16x10G+2x40G can feed each PoE port up to 30 Watt, max power budget 480W. Also supports advanced PoE management functions, such as PD detection, scheduling, and health tracking. PoE detection can detect if the connected PD status such as enabled/disabled, voltage, current, watt and temperature; scheduling is to allow pre-set power feeding schedule upon routine time table; health tracking can detect PD is alive or not, if PD is dead, will restart it.
S3000-16x10G+2x40G support 802.1p CoS(Class of service) QoS by VLAN and DiffServ that greatly enhance the bandwidth management in a network.
IGMPv1/v2/v3 is an important feature in the AV network. It brings a lot of benefit such as management multicast traffic, saves switch bandwidth.
ITU G.8032 ring which can be self-healed in less than 20ms at max 250 switches for single ring topology protection. It also supports various ring topologies such as a double ring, multi-chain and so on. It supports MSTP with up to 16 MSTI that allows each spanning tree for each VLAN for redundant links and backward compatible STP and RSTP.
A port-based DHCP server can assign a dedicated IP address by port, MAC-based DHCP server can assign a dedicated IP address by the client’s MAC Address. Option 82 can assign an IP address by a port for multiple switches with a single DHCP option 82 server.
In the case of the event, S3000-16x10G+2x40G have many useful logs for network troubleshooting. Once out of the situation S3000-16x10G+2x40G could send SMS, e-mail, SNMP trap or syslog to the manager immediately.
S3000-16x10G+2x40G chassis and modules are designed for easy maintenance and installation. It also supports dual AC input power 100V to 240V input to increase network reliability.
|Standards||IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Ethernet
IEEE 802.3ab 1000Base-T Ethernet
IEEE 802.3z Gigabit Fiber
IEEE 802.3ae 10G Ethernet over Fiber
IEEE 802.3an 10G Copper
IEEE 802.3x Flow Control Capability
ANSI/IEEE 802.3 Auto-negotiation
IEEE 802.1Q VLAN
IEEE 802.1p Class of Service
IEEE 802.1X Access Control
IEEE 802.1D Spanning Tree
IEEE 802.1w Rapid Spanning Tree
IEEE 802.1s Multiple Spanning Tree
IEEE 802.3ad Link Aggregation Control Protocol (LACP)
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
IEEE 802.1x User Authentication (Radius)
IEEE 1588 Precision Time Protocol v2
IEEE 802.3 at/af PoE
|Jumbo frame||10 KB|
|Connectors||Max 16x 10/100/1000T RJ-45 with auto MDI/MDI-X function
Max 16x 1000M Mini-GBIC : SFP sockets
Max 16x 10G Mini-GBIC : SFP+ sockets
Max 8x 40G Mini-GBIC : QSFP+ sockets
Mini-USB console x1
USB 3.0 x2 for import/export configuration file or upgrade firmware
DIDO : 6 pins terminal block
Maintenance port: RJ45 x 1
|Transfer Rate||14,880 pps for Ethernet port
148,800 pps for Fast Ethernet port
1,488,000 pps for Gigabit Fiber Ethernet port
14,880,000 pps for 10 Gigabit Fiber Ethernet port
|DI/DO||2 Digital Input (DI) : Level 0: -30~2V / Level 1: 10~30V Max input current:8mA
2 Digital Output(DO): Open collector to 40 VDC, 200mA
|Power Supply||Dual input for AC 100V to 240V|
|PoE Budget||480W in total. Per port up to 30W|
|PoE pin assignment||RJ-45 port # 1~#16 support IEEE 802.3at/af End-pointPositive (VCC+): RJ-45 pin 1,2.Negative (VCC-): RJ-45 pin 3,6.|
|Installation||19-inch rack mounting (1U)|
|Management||SNMP v1/v2c/v3, WEB/SSH/Telnet/CLI|
|SNMP MIB||RFC 1215 Traps MIB,
RFC 1213 MIB II
RFC 1158 MIB II
RFC 1157 SNMP MIB,
RFC 1493 Bridge MIB
RFC 1573 IF MIB
RFC 2674 VLAN MIB,
Partial RFC 1757 RMON,
RFC 2674 Q-Bridge MIB; Bridge MIB,
|ITU G.8032||Support ITU G.8032 v2/2012 for Ring protection in less than 50ms for self-healed recovery for single ring topology. Supports various ring topologies that include double ring, multi-chain, basic ring and multiple-VLAN ring|
|PoE Management||PoE detection, scheduling, health checking. Per port status include on/off, voltage, current, watts and temperature|
|Port Trunk with LACP||LACP port trunk up to 8 groups|
|Discovery Protocol||LLDP and CDP(Cisco Discovery Protocol)|
|Environmental Monitoring||System input voltage, current, power consumption ambient temperature|
|VLAN||Port Based VLAN
IEEE 802.1Q Tag VLAN (256 entries)/ VLAN ID(Up to 4K, VLAN ID can be assigned from 1 to 4094)
GVRP, QinQ, QoS QinQ, Protocol based VLAN ; IPv4/IPv6 Subnet based VLAN
|Spanning Tree||IEEE802.1d Spanning Tree
IEEE802.1w Rapid Spanning Tree
IEEE802.1s Multiple Spanning Tree max 16 MSTI
|Quality of Service||Determined by port, Tag and IPv4 Type of service, IPv4 Differentiated Services Code Points - DSCP|
|Class of Service||IEEE802.1p class of service, per port and provides 8 priority queues|
|QoS by VLAN||Tagged QoS by VLAN for all devices in the network|
|IP Security||Supports 10 IP addresses that have permission to access the switch management and to prevent unauthorized intruder|
|Login Security||Supports IEEE802.1X Authentication with RADIUS and TACACS+|
|Port Mirror||Ingress, Egress or both direction per port|
|Network Security||802.1X access control for port based and MAC based authentication/static MAC-Port binding
Ingress/Egress L2/L3 ACL
HTTPS for secure access to the web interface
SSH for secure shell to command line interface
|IGMP||Support IGMP snooping v1/v2/v3; Supports IGMP static route; 1024 multicast groups; IGMP router port ; IGMP query; GMRP|
|Bandwidth Control||Support ingress rate limit and egress rate limit/shaping.
In the ingress direction, packet type(Broadcast/Multicast/Flooded Unicast packet) combination rules are allowed.
|Flow Control||Supports Flow Control for Full-duplex and Back Pressure for Half-duplex|
|System Log||Supports System log record to remote server|
|E-Mail/SMS||Supports SMTP Server or cloud server to send event alert. Maximum 8 email accounts for receiving event alert.
Also can send event alert via SMS.
|Relay Alarm||Provides one relay output.
Alarm Relay current carry ability is 1A @ DC24V
|SNMP Trap||SNMP trap v1/v2c/v3|
|DHCP||Provide DHCP v4/v6 Client/Server/Relay that support addition option 82/66
MAC based can assign IP address by specific host
Port based can assign IP address by specific port
|DNS||Provide DNS client feature and support primary and secondary DNS server|
|SNTP||Supports SNTP to synchronize system clock via Internet|
|Firmware Update||Supports HTTP/HTTPs/TFTP firmware upgrade. TFTP backup and restore|
|Configuration import and export||Supports text configuration file for system quick installation.
Support factory reset button to restore all settings back to factory default.
Support USB storage backup and restore config file.
|PTP||IEEE-1588 PTP V2 for precise time synchronization to operate in Ordinary-Boundary, Peer to Peer Transparent Clock, End to End Transparent Clock, Master, Slave mode by each port|
|Power indicator||Power 1 (Green)
Power 2 (Green)
|10/100/1000/10G Base indicator||Orange: 10Gbps speed
Green : 1G/100M/10Mbps
|PoE LEDs||On (Green)|
|R.M LED||R.M. (Green)|
|Operating Humidity||5 to 90% (non-condensing)|
|Operating Temperature||-20°C~60°C / -4°F~140°F
-40°C~75°C / -40°F~167°F
|Storage Temperature||-40°C~85°C / -40°F~185°F|
|Stability Testing||IEC 60068-2-14 ---------------------------------------Operating Temperature and Humidity Cycle Test
IEC 60068-2-3 -----------------------------------------High Temperature Operating Test
IEC 60068-2-1 / IEC 60068-2-3 -------------------Power On/Off and Cold Start Test
IEC 60068-2-6 / IEC 60068-2-59 -----------------Vibration Test
IEC 60068-2-57 / IEC 60068-2-64 ---------------Vibration Test
ISTA 2A STD ------------------------------------------- Vibration Test
ISTA 2A STD ------------------------------------------- Package Drop Test
ISO 11201:2010/ISO 7779:2010/ Annex C. -- Acoustic Noise Test
Power Consumption Measurement
Four-Corner Temperature and Input Voltage Variation