Ethernet | Standards:
|
Capacity | Mac Address: 16K MAC address table Jumbo frame: 10KB Trunk Group: 8 Priority Queues: 8 VLAN Table: 4096 (VLAN ID Range) VLAN ID Range: 1 to 4094 Static IGMP Groups: 128 Dynamic IGMP Groups: 1024 |
Interfaces | RJ45 Ports:
Fiber Optic Ports: Mini-GBIC: 2 ports 1G/2.5G/10G SFP+ auto-sensing socket with DDMI LED Indicators:
DI/DO:
Reset Button: Yes |
PoE | PoE Ports: Max 30W per-port: support IEEE 802.3at/af End-point, Alternative A mode PoE Budget:
|
Power | Input Voltage:
Power Consumption Max. 27W (full load w/o PoE) |
Environmental Limits | Operating Humidity: 5% ~ 95% (Non-condensing) Operating Temperature:
|
Physical Characteristics | Housing: Metal case. IP-30, Weight: 900 g Installation: Rackmount Design |
Regulatory Approvals | MTBF: 586082.5 hours EMI: FCC Class A EMS:
|
Warranty | 5 years |
Link Aggregation | Static aggregation Dynamic aggregation (IEEE 802.3ad LACP) Maximum 8 groups (LAGs) and max 8 member ports per LAG |
Jumbo Frame | Maximum 10K bytes |
Broadcast/Multicast/Unicast Storm Suppression* | Storm suppression based on port bandwidth percentage Storm suppression based on PPS* |
MAC Address Table | Static MAC address Blackhole MAC address MAC learning limit* |
VLAN | IEEE 802.1Q Tag VLAN (up to 4094 VLANs) Port-based VLAN (up to 4094 VLANs)* MAC-based VLAN* Protocol-based VLAN IP subnet based VLAN QinQ (double-tag VLAN) VLAN Mapping (VLAN Translation)* Voice VLAN* MVRP |
Spanning Tree | Support STP/RSTP/MSTP BPDU Guard and Root Guard |
Loop Protect | Loopback detection and prevention |
ERPS | ITU G.8032 Ethernet ring protection switching (ERPS) |
DHCP | DHCP Client including option 66/67 DHCP Snooping including option 82 DHCP Relay including option 82 DHCP Server MAC based can assign IP address by specific host Port based can assign IP address by specific port |
Mirroring | Local port mirroring Ingress, Egress or both direction per port Remote port mirroring: RSPAN* |
Quality of Service | Port-based priority with 802.1p CoS priority override 802.1p CoS priority and IPv4 DSCP priority 8 Hardware queues per port Flexible queue scheduling algorithms including SP, WRR, and SP+WRR* |
Bandwidth Control (Rate Limit) | Bi-directional Rate limit in percentage (Ingress and Egress) In the ingress direction, packet type(Broadcast/Multicast/Unicast packet) combination rules are allowed. Traffic shapping in egress* |
ACL | Layer 2 to Layer 4 packet filtering Traffic classification based on source MAC, destination MAC, source IP, destination IP, TCP/UDP port, and VLAN* Bi-directional ACLs (Ingress and Egress*) VLAN-based ACL issuing* |
Discovery Protocol | Link Layer Discovery Protocol(LLDP) and CDP(Cisco Discovery Protocol) |
Multicast | IGMP Snooping v1/v2/v3 and MLD Snooping v1/v2 |
Security | Hierarchical user management and password protection Supports up to 10 IP addresses to access the switch HTTPS for secure access to the web interface SSH 2.0 for secure shell to command line interface MAC-based authentication* 802.1X 802.1X with VLAN assignment* 802.1X dynamic access control list(ACL) based on RADIUS attributes* RADIUS and TACACS+ Authentication Guest VLAN* Support Port Isolation* AAA authentication Dynamic ARP Inspection* |
SNMP & MIB | SNMP v1/v2c/v3 and Trap. SNMP v1/v2 providing light security by means of the community strings. SNMP v3 providing User-based Security Model (USM) and Transport Security Model (TSM)* Remote Monitoring (RMON) alarm, event, and history recording* Remote Monitoring (RMON) (RFC2819) Groups 1,2,3,9 RFC 1213 MIB II RFC 1157 SNMP MIB RFC 1573 IF MIB RFC 1757 RMON Private MIB |
IP Stack (for managed interface) | Both IPv4 and IPv6 stack simultaneously |
IPv6 | Neighbor Discovery (ND)* IPv6-Ping, IPv6-Tracert, IPv6-Telnet, and IPv6-TFTP* |
Configuration Import And Export | Readable text configuration file for system quick installation Support HTTP/HTTPs/FTP/FTP-SSL*/SFTP/TFTP backup and restore config file |
Firmware | Upgrading via HTTP/HTTPs/FTP/FTP-SSL*/SFTP/TFTP |
Management | Support CLI via SSH 2.0, Telnet and Console System log, alarming based on severity WEB UI management through HTTP/HTTPs NTP, SNTP System utilization and temperature alarming Ping, Tracert* Device Link Detection Protocol (DLDP)* |
P/N | Model name | Discription |
---|---|---|
RAS-24GP-2X2T | RAS-24GP-2X2T | Dual 44~56VDC input -20°C~60°C / -4°F~140°F PoE per-port up to 30W; PoE total budget 240W |
RAS-24GP-2X2T-I | RAS-24GP-2X2T | Dual 44~56VDC input -40°C~75°C / -40°F~167°F PoE per-port up to 30W; PoE total budget 240W |
RAS-24GP-2X2T-24V | RAS-24GP-2X2T | Dual 24VDC input -20°C~60°C / -4°F~140°F PoE per-port up to 30W; PoE total budget 120W |
RAS-24GP-2X2T-I-24V | RAS-24GP-2X2T | Dual 24VDC input -40°C~75°C / -40°F~167°F PoE per-port up to 30W; PoE total budget 120W |
RAS-24GP-2X2T-EV | RAS-24GP-2X2T | Dual 12~57VDC input -20°C~60°C / -4°F~140°F PoE per-port up to 30W; PoE total budget 80W@12V, 120W@24V, 240W@48V |
RAS-24GP-2X2T-I-EV | RAS-24GP-2X2T | Dual 12~57VDC input -40°C~75°C / -40°F~167°F PoE per-port up to 30W; PoE total budget 80W@12V, 120W@24V, 240W@48V |