Industrial DIN-Rail Ethernet Switches

DG-3C-R

Datasheet Manual
  • Compatible with IEC 62439-3 Clause 5“High-availability Seamless Redundancy (HSR)”
  • Compatible with IEC 62439-3 Clause 4”Parallel Redundancy Protocol (PRP)”
  • Meets with IEC-61850-3 and IEEE1613 Standards


OVERVIEW

Intrising DG-3C-R is an IEC 62439-3 zero recovery time managed PRP/HSR redundancy box with 3 10/100/1000TX + 3 Dual Speed SFP Combo which meets the IEC-61850-3 & IEEE 1613 Standards.

Follow standard IEC 62439-3, supports High-availability Seamless Redundancy (HSR) and the Parallel Redundancy Protocol (PRP) to provide the ultimate in network reliability and zero failover time from network faults. All the ports support copper or fiber media and triple-speed (10Mbps/100Mbps/1Gbps) and the internal wire-speed forwarding capability (gigabit Full-Duplex at all the ports at the same time) makes it one of the best performing HSR/PRP solutions in the market.

The DG-3C-R DIDO function can support additional open/close physical contact for designate applications besides Port / Power events, for example, DIDO function can trigger alarm if the switch was moved or stolen. In case of events, the DG-3C-R will immediately send an email & SMS text message to pre-defined addresses as well as SNMP Traps out. It provides 2DI and 2DO while disconnection of the specific port was detected; DO will activate the signal LED to alarm. DI can integrate the sensors for events and DO will trigger the alarm while sending alert information to IP network with email and traps.

The Intrising DG-3C-R is designed with redundant power supply input at 12~56VDC. Optional 85-264VAC or 88-300VDC model is also available. Featured with relay contact alarm function, the DG-3C-R is able to connect with alarm system in case of power failure.

FEATURES

  • 3 Dual Speed SFP + 3 10/100/1000TX Combo
  • Meets with IEC 61850-3 & IEEE 1613 standards
  • Supports DIDO (Digital Input/Digital Output)
  • IP30 metal housing with DIN rail and Wall Mount** design
  • Dual DC input from 12V~56VDC, HV model with one 85~264VAC or 88~300VDC power input
  • Compatible with IEC 62439-3 Clause 5 “High-availability Seamless Redundancy (HSR)”
  • Compatible with IEC 62439-3 Clause 4 ”Parallel Redundancy Protocol (PRP)”
  • HSR RedBox, HSR End-node, HSR QuadBox, PRP RedBox and DANP support
  • Zero recovery time from network failures
  • Triple-speed (10Mbps/100Mbps/1Gbps), full-duplex operation on all ports
  • Ethernet packet forwarding at wire-speed, non-blocking
  • All of the ports can be either copper or fiber Ethernet interfaces
  • Time and frequency synchronization using IEEE1588-v2 Precision Time Protocol (Optional)
  • IEC 62439-3 PRP
  • Guaranteed behavior under failure conditions
  • High availability network using simultaneous transmission over two Ethernet ports
  • Efficient elimination of duplicated packets at hardware level
  • Zero recovery time from network failures
  • FPGA implementation maximizes PRP performance
  • Wide operating temp. -40°C to 75°C
  • Wide-range high-voltage AC/DC power supply
  • SSH/SSL encryption
  • Web-based, Telnet, CLI

Standards

  • IEEE 802.3 for 10BaseT
  • IEEE 802.3u for 100BaseT(X) and 100BaseFX IEEE 802.3ab for 1000BaseT(X)
  • IEEE 802.3z for 1000BaseX

Power Requirements

  • WV: 24/48 VDC (12 to 56 VDC dual input)
  • HV: 110/220 VDC/VAC (120 to 430 VDC, 90 to 305 VAC)

Physical Characteristics

  • Housing: IP30 protection
  • Dimensions:
    • WV: 74(W) x 152(H) x 105(D) mm
    • HV: 74(W) x 152(H) x 135(D) mm
  • Weight: 900 g
  • Installation: DIN rail mounting

Interface

  • Gigabit Ethernet:
    • 3 x 10/100/1000BaseT(X) ports or 100/1000BaseSFP combo ports
  • Console Port:
    • Ethernet console (10/100/1000 Mbps RJ45),RS232-serial console (RJ45 type connector) System LED Indicators: PWR1, PWR2, FAULT, PRP/HSR, QUAD
  • Ethernet Port LED Indicators:
    • Link/Activity (Green), Speed (Green)
  • Mini-GBIC Port LED Indicators:
    • Link/Activity (Green)
  • Alarm Contact:
    • 1 x relay output with current carrying capacity of 1 A @ 24 VDC
  • Digital Inputs: 2 x input with the same ground
    • +10 to +30V for state “1”
    • -30 to +2V for state “0”
    • Max. input current: 8 mA
  • Digital Outputs:
    • 2 x Open collector to 40VDC,200mA
  • Button:
    • Reset button

Environmental Limits

  • Operating Temperature:
    • -40 to 75°C (-40 to 167°F)
  • Storage Temperature:
    • -40 to 85°C (-40 to 185°F)
  • Ambient Relative Humidity:
    • 5 to 95% (non-condensing)

Standards and Certifications

  • EMI&EMS:
    • FCC Class A, CE EN61000-6-2, CE EN61000-6-4, CE EN61000-4-2, CE EN61000-4-3, CE EN61000-4-4, CE EN61000-4-5, CE EN61000-4-6, CE N61000-4-8, EN61000-4-11
  • Stability Testing:
    • IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock), IEC60068-2-6 (Vibration)

Warranty

  • Warranty Period:
    • 5 years

Management

  • Web-based:
    • support both HTTP and HTTPS

MTBF

  • 830,589 hrs

Standards

  • IEEE 802.3 for 10BaseT
  • IEEE 802.3u for 100BaseT(X) and 100BaseFX IEEE 802.3ab for 1000BaseT(X)
  • IEEE 802.3z for 1000BaseX

Power Requirements

  • WV: 24/48 VDC (12 to 56 VDC dual input)
  • HV: 110/220 VDC/VAC (120 to 430 VDC, 90 to 305 VAC)

Physical Characteristics

  • Housing: IP30 protection
  • Dimensions:
    • WV: 74(W) x 152(H) x 105(D) mm
    • HV: 74(W) x 152(H) x 135(D) mm
  • Weight: 900 g
  • Installation: DIN rail mounting

Interface

  • Gigabit Ethernet:
    • 3 x 10/100/1000BaseT(X) ports or 100/1000BaseSFP combo ports
  • Console Port:
    • Ethernet console (10/100/1000 Mbps RJ45),RS232-serial console (RJ45 type connector) System LED Indicators: PWR1, PWR2, FAULT, PRP/HSR, QUAD
  • Ethernet Port LED Indicators:
    • Link/Activity (Green), Speed (Green)
  • Mini-GBIC Port LED Indicators:
    • Link/Activity (Green)
  • Alarm Contact:
    • 1 x relay output with current carrying capacity of 1 A @ 24 VDC
  • Digital Inputs: 2 x input with the same ground
    • +10 to +30V for state “1”
    • -30 to +2V for state “0”
    • Max. input current: 8 mA
  • Digital Outputs:
    • 2 x Open collector to 40VDC,200mA
  • Button:
    • Reset button

Environmental Limits

  • Operating Temperature:
    • -40 to 75°C (-40 to 167°F)
  • Storage Temperature:
    • -40 to 85°C (-40 to 185°F)
  • Ambient Relative Humidity:
    • 5 to 95% (non-condensing)

Standards and Certifications

  • EMI&EMS:
    • FCC Class A, CE EN61000-6-2, CE EN61000-6-4, CE EN61000-4-2, CE EN61000-4-3, CE EN61000-4-4, CE EN61000-4-5, CE EN61000-4-6, CE N61000-4-8, EN61000-4-11
  • Stability Testing:
    • IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock), IEC60068-2-6 (Vibration)

Warranty

  • Warranty Period:
    • 5 years

Management

  • Web-based:
    • support both HTTP and HTTPS

DIMENSION

ORDER INFORMATION

P/N Model name Discription

P/N Model name Discription

Model name Discription
AD1048-24FS 24VDC, 2A, Wide AC Input, Convection Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C (ambient, derating each output at 2.5% per degree from 50°C ~ 75°C, which means the output is 18 Watts at 75°C.)
AD1024-24F 24VDC, 1A, Wide AC Input, Convection Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C (ambient, derating each output at 2.5% per degree from 50°C ~ 75°C, which means the output is 9 Watts at 75°C.)